U s e r’s g u i d e Guía del usuario
FCC Instructions for a Class B digital device or peripheral Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. ALTEC LANSING TECHNOLOGIES, INC.
IN MOTION IM9 MOBILE SPEAKER DC ( B a tte ry ) P o w e r Install four C batteries (not included) into the battery compartment on the bottom of the inMotion iM9. Make sure the batteries are installed as illustrated in the battery compartment. SYSTEM Start Playing Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand.
Troubleshooting Symptom Possible Problem Solution No Power LED is lit (AC Operation). The power supply isn’t connected to a wall outlet and/or the power supply connector is not plugged into the power supply jack on the back of the inMotion iM9. Insert the barrel connector from the power supply into the DC connector on the back of the inMotion iM9. After this connection is made, insert the power supply into a wall outlet. The surge protector (if used) isn’t powered on.
La figura de relámpago que termina en punta de flecha y se encuentra dentro de un triángulo equilátero, tiene por finalidad alertar al usuario de la presencia de “voltaje peligroso” sin aislamiento en el interior del producto que podría tener potencia suficiente para constituir riesgo de choque eléctrico para las personas. Precaución: Para evitar el riesgo de choque eléctrico, no retire la cubierta (o parte posterior). En su interior hay piezas que no debe manipular el usuario.
S u m i n i s t ro d e p o t e n c i a C C ( B a t e r í a ) IN MOTION IM9 SISTEM A PORTÁTIL DE Instale cuatro baterías C (no incluidas) en el compartimiento de baterías ubicado en la parte inferior del sistema inMotion iM9. Tenga cuidado de instalar las baterías tal como se indica en el compartimiento de baterías. PARL ANTES Gracias por comprar este producto de Altec Lansing. Por generaciones, Altec Lansing ha ocupado el primer puesto en innovación de audio.
Solución de problemas Síntoma Posible problema Solución Ningún indicador LED de encendido está iluminado (Operación de CA). El cordón de la fuente de suministro universal no está conectado a un tomacorriente de pared y/o el conector de suministro no está enchufado en la clavija de suministro de potencia ubicada en la parte posterior del sistema inMotion iM9. Inserte el conector cilíndrico de la fuente de suministro en el conector de CC ubicado en la parte posterior del sistema inMotion iM9.
7
This Class B digital apparatus complies with Canadian ICES-003. • Cet appareillage digital de Classe B est conforme au ICES-003 canadien. Corporate Headquarters 535 Rte. 6 & 209, Milford, PA 18337-0277, USA • 866-570-5702 • 570-296-4434 • Fax 570-296-6887 Europe 13 Rue Beaumont, L-1219 Luxembourg, Luxembourg Asia/Pacific 25 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Engineered in USA.