Operation Manual

14
Listening to a Non-docking iPod or Other Portable Audio Device
Ifyouhaveanon-iPodMP3playerorothernon-dockingportableaudio
device,youcanenjoyitthroughyourAltecLansingMoondanceGlow
speakersystemaswell.JustconnectitviatheAUXjack.Here’show:
1 Locate a 3.5 mm stereo cable
(not included).
2 Plug one end of the stereo cable
into your device.
Your device should have either a
headphoneorLINEOUTjackforyou
to plug into.
3 Plug the other end of the stereo
cable into your speaker system’s
AUX jack.
TheAUXjackislocatedonthebackoftheunit.
4 Select “AUX” mode.
Press the
button on your speaker system or the enhanced
remoteuntiltheAUXiconappearsonthespeakersystem’sLCD.
5 Turn on your device and start it playing.
6 Adjust the volume.
Usethe+and–buttonsonthespeakersystemtoadjustthevolume.
Or,usethe+and–buttonsontheenhancedremote.
NOTE Youmayneedtoadjustthedevicevolumealso.Yourdevice’s
volumeshouldbesettoapproximately¾volume.
7 When you are finished listening to your portable audio device,
please remember to turn both it and your speaker system off
to conserve electricity.