Operation Manual

16
Setting the Clock Display
How to Set the Clock Time and Date
1 Press and hold the CLOCK button for 3 seconds.
TheCLOCKbuttonislocatedonthebackofyourAltecLansing
speakersystem.ThisputsyouintheTime/DateSetmode.
2 Select either 12-Hour or 24-Hour Clock mode.
Press the
or button on your speaker system or the enhanced
remotetoselecteither12-Houror24-HourClockmode.Thenpress
theCLOCKbuttontosavethissettingandentertheHourSetmode.
3 Set the hour.
Use the
and buttons on your speaker system or the enhanced
remotetoadjustthehour.ThenpresstheCLOCKbuttontosavethis
settingandentertheMinuteSetmode.
4 Set the minute.
Use the
and buttons on your speaker system or the enhanced
remotetoadjusttheminute.ThenpresstheCLOCKbuttontosave
thissettingandentertheAM/PMSetmode,if12-HourClockmode
waspreviouslyselected.If24-HourClockmodewasselected,
pressingtheCLOCKbuttonwillsavetheminutesettingandplacethe
unitintoDaySetmode.
5 Set AM/PM.
Press the
or button on your speaker system or the enhanced
remotetoselectAMorPM.PresstheCLOCKbuttontosavethis
settingandentertheDaySetmode.
6 Set the day.
Press the
or button on your speaker system or the enhanced
remotetoselectthedayoftheweek.ThenpresstheCLOCKbutton
tosavethissettingandentertheMonthSetmode.