Moondance Home Digital Speaker System and Alarm Clock for iPod User Guide

14
Setting the Clock Display
How to Set the Clock Time and Date
1 Ensure your speaker system is powered on.
If the system isn’t on, press the STANDBY button on the speaker
system or the
button on the wireless remote.
2 Press and hold the TIME button for 3 seconds.
TheTIMEbuttonislocatedonthetopofyourAltecLansingspeaker
system.ThisactionputsyouintheTime/DateSetmode.
3 Select either 12-Hour or 24-Hour Clock mode.
Use the
and buttons on your speaker system or the
VOLUME+and–VOLUMEbuttonsonthewirelessremotetoselect
either12-Houror24-HourClockmode.ThenpresstheTIMEbutton
to save this setting and enter the Year Set mode.
4 Set the year.
Use the
and buttons on your speaker system or the
VOLUME+and–VOLUMEbuttonsonthewirelessremotetoselect
theyear.ThenpresstheTIMEbuttontosavethissettingandenter
the Month Set mode.
5 Set the month.
Use the
and buttons on your speaker system or the
VOLUME+and–VOLUMEbuttonsonthewirelessremotetoselect
themonth.PresstheTIMEbuttontosavethissettingandenterthe
Date Set mode.
6 Set the date.
Use the
and buttons on your speaker system or the
VOLUME+and–VOLUMEbuttonsonthewirelessremotetoselect
thedate.PresstheTIMEbuttontosavethissettingandenterthe
Hour Set mode.
7 Set the hour.
Use the
and buttons on your speaker system or the
VOLUME+and–VOLUMEbuttonsonthewirelessremotetoadjust
thehour.BesuretotakenoteoftheAM/PMsettingifyouselected
12-HourClockmode.ThenpresstheTIMEbuttontosavethissetting
and enter the Minute Set mode.
8 Set the minute.
Use the
and buttons on your speaker system or the
VOLUME+and–VOLUMEbuttonsonthewirelessremotetoadjust
the minute.
9 Exit the Time/Date Set mode.
PresstheTIMEbuttononthespeakersystemortheENTERbutton
onthewirelessremotetoexittheTime/DateSetmode.Thespeaker
systemwillalsoautomaticallyexittheTime/DateSetmodeafter
5secondsofinactivity.
NOTE Theclockisalwaysdisplayed–eitherinthemainpartoftheLCDor
in the lower right-hand corner if you are interacting with the speaker system.
NOTE This Altec Lansing Moondance Home speaker system features
a built-in backup battery system to provide continuous clock settings in
the event of a power failure. If a power failure occurs or the AC cord is
accidentally disconnected, the display will not remain lit and the alarm will
not function, but the current time will be maintained.