Operation Manual
13
EN
Troubleshooting
Symptom Possible Problem Solution
Speaker system
doesn’t respond
(no power)
AC adapter isn’t plugged into a wall outlet or the
connector isn’t plugged into the power supply jack on
the back of the speaker system.
Plug the AC adapter into a wall outlet and plug the connector into the power
supply jack on the back of the speaker system.
Wall outlet is not functioning. Plug another device into the same outlet to confirm the outlet is working.
The power isn’t turned on.
Turn on the speaker system by pressing the
button. The “Power” LED
lights up.
iPhone or
iPod doesn’t
dockproperly
The wrong adapter for iPhone or iPod is being used,
or no adapter.
Make sure the adapter is the proper one for your iPhone or iPod.
iPhone or iPod didn’t install properly. Remove your iPhone or iPod from the dock and check for obstructions
onthe connectors in the dock and on your iPhone or iPod. Then reseat it
inthe dock.