IMT7001
IMT7001 IMT7001 Quick Start Guide AUX. Audio cable Adapter Wired Mic.
INPUT/OUTPUT PORTS Descriptions about the various ports on the speaker AUX: For line level or headphone output from audio sources USB OUT: For charging your mobile devices MIC2: For 2nd wired microphone MIC1: For 1st wired microphone DC IN: Plug for power adapter
Brief introduction to buttons on top panel MIC Volume Control： Press MIC1 and MIC2 volume buttons to increase or decrease the volume of both microphones Power Button： Press and hold button 3 seconds to power on or power off speaker Select mode (FM or AUX) Light modes Select Bluetooth mode (also used for stereo pairing see later section) VOLUME-: decrease volume VOLUME+: increase volume Previous song or FM station Play/pause (BT mode only) Next song or FM station Bass-: decrease bass Bass+:increase
Bluetooth Connection Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as “AL Shockwave 100” AL Shockwave 100 Stereo pairing (two speakers) : Primary Speaker Secondary Speaker 1. Have one speaker turned on, paired and playing music. It will serve as the HOST (the Primary speaker). The display will be showing ‘Bt’ (Pair by pressing the BT/PAIR button, BT flashes on the display then goes solid when paired). 2.
LIGHTING CONTROL Briefly press the LIGHTS button for lighting control: (Noted: Cone’s light will be displayed while unit is playing music) LED 1: Side lights scrolling multi-color, cones’ color change with the beat; press and hold to change as single color scrolls one by one; LED 2: Sides & cones follow music and change color automatically every 3 seconds; LED 3: Side lighting one color, cones follow music to flash the same color, press and hold for 3 seconds to change to the other color; LED 4: Sides off,
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier Trade Name: Altec Lansing Model No.: IMT7001 Responsible Party – U.S. Contact Information US Company Name: SAKAR INTERNATIONAL INC. Address: Edison, NJ 08817 Telephone number or internet contact information: 855-292-4087 RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2.Keep these instructions – The safety and operating instructions should be retained for future reference. 3.Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow all instructions – All operating and use instructions should be followed. 5.
IMPORTANT SAFETY INSTRUCTIONS ATTENTION:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR 19. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside.
