Quick Start Guide
LIGHTING CONTROL
Briey press the LIGHTS button for lighting control:
(Noted: Cone’s light will be displayed while unit is playing music)
LED 1: Side lights scrolling multi-color, cones’ color change with the beat;
press and hold to change as single color scrolls one by one;
Length of Audio cable(stereo-to-stereo):90cm
Length of adaptor:110cm
Length of wired micphone’s cable:285cm
L267xW238xH504(mm)
43W (RMS)
150W (Peak) Total
5.25” x2 + 2” x1
DC input:15V 1.5A
LED 2:
Sides & cones follow music and change color automatically every 3 seconds;
LED 3: Side lighting one color, cones follow music to ash the same color,
press and hold for 3 seconds to change to the other color;
LED 4: Sides o, just cones ash into one color,
press and hold for 3 seconds to change to the other color;
LED 5: Sides do a bar graph from the middle in one color and cones ash
the same color, press and hold for 3 seconds to change to the other color;
LED 6:
Sides and cones slowly change colors automatically every 3 seconds,
press and hold to turn cone lights o;
LED 7: Sides ash one color, cones no light,
press and hold for 3 seconds to change to the other color;
LED 8: Sides do a multi-color bar graph from the middle, cones o;
LED 9: Sides fade between colors, cones o;
OFF : Lighting o.