User’s guide
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
T612 Digital Speaker System for iPhone ™ Connecting your iPhone Big rich sound for iPhone without missing your calls! Thank you for purchasing the Altec Lansing T612 digital speaker system for iPhone. Made to complement the iPhone model’s command of the digital world, the T612 extends your iPhone model’s high-end audio capabilities with beautifully transparent music reproduction.
Treble and Bass To control treble or bass levels, press the TREBLE or BASS buttons on the top of the unit and press and hold the “+” button to increase the corresponding level, or the “–” button to decrease it. An LED indicator located on the front of the unit will.indicate the corresponding level. Note: After a few seconds, the “+” and “–” controls will automatically reset to controlling the volume.
Troubleshooting Symptom Possible Problem Solution No Power LED is lit (AC Operation). The power supply isn’t connected to a wall outlet and/or the power supply connector is not plugged into the power supply jack on the back of the T612 system. Insert the barrel connector from the power supply into the DC connector on the rear of the T612 system. After this connection is made, insert the power supply into a wall outlet. The surge protector (if used) isn’t powered on.
This Class B digital apparatus complies with Canadian ICES-003. • Cet appareillage digital de Classe B est conforme au ICES-003 canadien. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. “Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.