Quick Start Guide

Setting the Language
1. Press the Menu button until SET LANGUAGE appears on the display.
2. Press the Select or >|
button to enter the menu.
3. Press the +
and – buttons to toggle through the following 3 options; English,
Espanol, or Francaise then press SELECT.
4. Press Select or >|
to save the desired option and exit the menu.
1. Press the Menu button until BACKLIGHT appears on the display.
2. Press the Select or >|
button to enter the menu
3.Press the +
and – buttons to select between On Bright, On Dim, Alert Only (only
comes on when displaying alert text), and O.
4. Press Select or >|
to save the desired option and exit the menu
Testing/Setting the Alert Siren Volume
1. Press the Menu button repeatedly until ALERT TEST/VOL appears on the display.
2. Press the Select or >| button to enter the menu, the Alert will sound.
3. Press the +
and - buttons to increase or decrease the volume of the alert sound.
4. Press Select or >|
to save the volume level (which will be used for next alert) and
exit the menu .
Setting TREBLE/ BASS
1. Press the Menu button until TREBLE/BASS appears on the display.
2. Press the Select or >|
button to enter the menu.
3. Press the +
and – buttons to adjust the treble.
4. Press the >|
button to move to the next setting.
5. Press the +
and – buttons to adjust the bass.
6. Press SELECT or >|
to save the adjustment and exit the menus .
Reset Settings
Note this resets all settings including radio presets, NOAA/SAME frequency, location etc.
1. Press the Menu button until RESET appears on the display.
2. Press SELECT or >|
to enter the menu.
3. Press Select again when the display is showing SURE Y/N to reset all settings unit
will go back to all factory defaults
Setting Backlight Brightness