Specifications

AL2094S Designers Guide
AL2094S-E00-102 xmodus swiss GmbH Seite 25 / 30
4.3 Manufacturing Considerations
The Socket Modem has been designed to be mounted onto the host board in one of two
ways.
The first method consists of soldering a DIP-40 socket to the host board and inserting the
Socket Modem into the socket.
The second way is to solder the Socket Modem directly to the host board. The most efficient
way to do this is through a wave solder process. The recommended hole size for the Socket
Modem pins is 0.036 in. ±0.003 in. in diameter. Spacers can be used to hold the Socket
Modem vertically in place during the wave solder process.
Socket Modems can be put through a water wash process.