User manual

18 | P a g e
© Copyright 2011 Altech UEC (Pty) Ltd
10.2.4 Note that these offsets will be adjusted if two recordings are scheduled to
record one after the other. Since the set top box can only decode one channel
at a time, the offsets will be adjusted accordingly.
10.3 J UMP S ETTINGS
10.3.1 Pressing the jump back button briefly will jump back by the period of time set in
the “small jump backward” setting.
10.3.2 Pressing and holding the jump back button will jump back by the period of time
set in the “big jump backward” setting.
10.3.3 Pressing and holding the fast forward button will jump forward by the period of
time set in the “big jump backward” setting (minimum 10 minutes).
10.4 S AFELY D ISCONNECT H ARD D RIVE
10.4.1 To remove your hard drive, press OK on “Safely disconnect hard drive” before
removing. This will safely shut down the drive and ensure all recordings are
stored securely.
10.5 F ORMAT H ARD D RIVE
10.5.1 Press OK on the “Hard drive format” option to correctly configure the hard drive
for use the first time it is connected to the PVR.
10.5.2 Format hard drive can also be used to erase all recorded programs on the hard
drive.
10.5.3 If the hard drive becomes corrupted and unusable, the “Hard drive format”
option can recover the drive, but all recordings will be lost.