User's Manual

7
◆ Switch off the phone and remove the battery and other external power supply.
◆ Insert the SIM card into the SIM holder.
◆To take out the SIM card, you should switch off the phone firstly. Remove the battery and then take the SIM card out of the holder.
Switch on/off the Phone
Press the End key long to switch on/off the phone.
If the phone is switched off but no SIM card is inserted, then the phone will remind you of inserting SIM card in. After the SIM card is inserted in, the
phone will automatic ally check if this card is usable.
Then the screen will have the following instructions in order:
Input PIN1 -If you have set SIM card password.
Input phone password - If you have set the phone unlock password.
Search network -The phone will search the networks until the proper one is found.
Unlock the SIM Card
In order to avoid illegal use, the SIM card adopts the PIN (Personal Identification Number) protection function. When this function is activated, for every
switch-on, you must input the PIN number to unlock the SIM card, and then you can dial or receive a call. You may erase the SIM card protection (in such case,the
SIM card will be unable to prevent illegal use).

Press the End Key to switch the mobile
p
hone.
Input the PIN number, press the Right Soft Key to erase the wrong entry and press the Enter Key to confirm. For example, if the PIN number is set as
1234, then you will enter the following digits:
1234
If the PIN number is input wrongly for three times successively, your SIM card will be locked by the network and the mobile phone will ask you to input
the PUK1 number. If you don’t know the PUK1 number, do not input a wrong one but hand the SIM card to network operator for solution.
Note: Your network supplier will set one standard PIN number (4 ~ 8 digits) for your SIM card, you should change it into your own private number. For
detailed operation, see Section 4.6.4 “Safety Settings”.
Phone Unlock
In order to prevent illegal use, you may set phone password protection. When this function is selected, for every switch-on, after the PIN number (if you
have set PIN number protection for your phone) is input, you must input to unlock the phone, and then you can dial or receive a call. You may erase the phone
password; in such case, the phone will be unable to prevent illegal use.
 In
p
ut the
p
hone
p
assword,
p
ress the Right Soft Key to erase the wron
g
entr
y
and
p
ress the Enter Key to confirm. For exam
p
le, if the
p
hone
p
assword is
set as 1122, then you will enter the following digits:1122
If you forget the password number, you should contact your dealer or the local authorized service center to unlock your phone password.
Connect to Network
After the SIM c ard is unlocked, the phone will automatically search the available networks (“Searching Networks” occurs on the screen). Once the desired
network is found, the name of the network supplier will occur on the screen. In such case, the phone will be in standby. In addition to dialing and receiving calls。
Note: If the screen displays “Emergency only”, it will indicate you are out of the coverage of the network (out of service), but you can send an emergency call
according to the signal strength.
Dial a Call
When the logo of the network supplier occurs on the screen, you may dial or receive a call. The message bars on the screen indicate the strength of
network signals.
Call quality can be affected greatly by barriers, so the movement in a small scope may improve call quality.
Dial a Domestic Call
Press the desired Number Keys to enter the desired phone number and then press the Dial Key to start the call. To change the phone number, press the
Right Soft Key backward. During dialing a call, the screen will display the dialing cartoon, after the receiving party picks up his/her phone, the screen will display
the information of being connected. If the alert tone is activated, you will hear the alert tone (the network support is needed).
Press the End Key to end the call.
Area code Phone number Dial Key
Dial a Fixed Call
You cannot connect some fixed cal extensions directly but connect the phone exchange and then dial the extension number. If you insert the pause symbol “P”
in between the exchange number and the extension number, then the phone will help you to complete all dials and connect you to the target extension.
Area code Exchange number P Extension number Dial Key
Dial an International Call
To dial an international call, you should input the prefix symbol “+”, which will allow you to dial a call from any country when you don’t know the international
prefix code of the local country (such as 00 in China).
The same as a domestic call, you need to delete the “0” in the front of the city code.
For example, to dial our hotline from other countries, you should dial:
+8621114
+ Country code Complete phone number Dial Key
Dial a Call in the Log List
The dialed and received calls are stored in the log list of the phone and generally the latest calls dialed and received will come to the top of the log list.These
calls are classified into the dialed calls, received calls and missed calls and the phone will provide all call options for your reference. When the log list is full, the
old calls will be deleted automatically. Please operate as follows to view the log list:
■Press the Dial Key to view the log list.