User's Manual
2
UP
Press it to increase the volume
Press it to turn the phone to vibration mode from
the silent mode.
Down Press it to decrease the volume.
Proximity
Sensor
Cover it, and then the phone’s backlight
will turn off.
Front
Camera
Entering the camera interface, switched to
the front camera can photo yourself.
LED Light
Display mobile phone status and prompt unread
messages
2.
Using Memory Card as U Disk
Ifyouwanttosendmusic,picturesorotherfilestothephone’smemorycardfromthe
compute r,youshouldsetmemorycardasudiskfirst.
Setmemorycardasudisk
1) Connectthephonetothe computerwithUSBcable.Thenotificatio nicon
willappearinthe
statusbox.
2) Openthenotificationpanel.
3) Inthenotificati onpanel,touchUSBisco nnected,thentouch“Openthe
USBStorageDevice”.
Notices :IfyouconnectyourphonetothecomputerthenchooseopentheUSBdevice,
thephonecan’t read thememorycard.Youtemporarilycannotusesomeapplica tions,suchas
camera.
UninstalltheUDiskfromcomputer
Thesameasthemethodofconnectingit,seethefollowingpicture:
3. Wifi
Wi ‐Fiprov idesasfaras300feet(100M)rangeofwirelessnetworkaccess.Ifyouusecellphoneto
connectwifi,youshouldconnec ttothewirelessaccesspointor「hotspots」.
Notices:The availability and coverage of Wi‐Fi signal depend on the
number,infrastructureandotherobjectspenetratedbythesignal.
OpenWi‐fiandtoconnecttothewirelessnetwork
1) Presshome>menu,thentouchsettings>wifiandinternet
2) Selectthewi‐fibox,toopenWi‐Fi .Phonewill
automaticallyscanforavailablewirelessnetworks.
3) Touc hWi‐Fisettings.ThenalistofWi‐Fi networkwillshowthefo undednetwork nameand
securitysettings.(opennetworkorWEP、WP A/WP A2withpassword).Ifyouenablethenotificationin
Wi ‐Fisettings,The status boxwill showthisicon(
)when open available wireless network
founde d.
4) Touc h one of the Wi‐Fi choices to connect the network. When you
choose open network,phone will connect to it automatically.If you choose
WEP、WPA/WPA2 with password,you should type the password first, then
touchtoconnectit.
Notices:whenthephoneisconnectedtothewirelessnetwork,
ThestatusboxwillshowthisWi ‐Fiicon(
),andtheapproximate
signalstrengthen(thenumberoflitbars).Iftouchtheconnected