User's Manual

昱能科技
NO.1 Yatai Road, Jiaxing, Zhejiang, China
浙江省嘉兴市南湖区亚太路 1 号
[phone] | APsystems.com
P0_7
Digital I/O
Port0.7
P1_0
Digital I/O
Port1.0 – 20-mA drive capability
P1_1
Digital I/O
Port1.1 – 20-mA drive capability
P1_2
Digital I/O
Port1.2
P1_3
Digital I/O
Port1.3
P1_4
Digital I/O
Port1.4
P1_5
Digital I/O
Port1.5
P1_6
Digital I/O
Port1.6
P1_7
Digital I/O
Port1.7
P2_0
Digital I/O
Port2.0
P2_1
Digital I/O
Port2.1
P2_2
Digital I/O
Port2.2
VCC
Power
2-V–3.6-V digital power-supply connection
GND
Ground
Connect to GND
RESET_N
Digital input
Reset, active-low
Package Size
4. Warning
This device complies with Part 15, Subpart C, Section 15.247 of the FCC Rules.
- product should not collocate with other radio
- host label should content modular FCC ID:2AFGR-APS2530H/IC :20481-APS2530H
- ANT type/gain tolerance of antenna OEM should use.
Use only the antenna supplied by the manufacturer when operating this device(antenna
gain:2dBi). Unauthorized antennas, modifications, or attachments, could damage the
device and violate FCC regulations. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
- Do not disassemble, repair, modify or replace the remote