Specifications

Table 2-6: Build configurations
Unsupported CDT Feature Alternative Nios II Feature
• Right-click project and point to Build Configu‐
rations
• Debugger tab
• Stop on startup
The Nios II plugins only support a single build
configuration. This feature is supported only at the
top of main().
Table 2-7: Exclude from Build (from version 10.0 onwards)
Unsupported CDT Feature Alternative Nios II Feature
Right-click source files Use Remove from Nios II Build and Add to Nios
II Build.
Table 2-8: Project Properties
Unsupported CDT Feature Alternative Nios II Feature
C/C++ Build
• Builder Settings
• Makefile generation
• Build location
• Behavior
• Build on resource save (Auto build)
• Build Variables
• Discovery Options
• Environment
• Settings
• Tool Chain Editor
• Current builder
• Used tools
By default, the Nios II SBT generates makefiles
automatically.
The build location is determined with the Nios II
Application Properties or Nios II BSP Properties
dialog box.
To change the toolchain, use the Current tool chain
option.
C/C++ General
• Enable project specific settings
• Documentation tool comments
• Documentation
• File Types
• Indexer
• Build configuration for the indexer
• Language Mappings
• Paths and Symbols
The Nios II plugins only support a single build
configuration.
Use Nios II Application Properties and Nios II
Application Paths.
NII5V2
2015.05.14
CDT Limitations
2-39
Getting Started with the Graphical User Interface
Altera Corporation
Send Feedback