User manual

2–8 Chapter 2: USB-Blaster Specifications
Statement of China-RoHS Compliance
USB-Blaster Download Cable User Guide © April 2009 Altera Corporation
Statement of China-RoHS Compliance
Table 28 lists hazardous substances included with the USB-Blaster download cable
(Rev. C).
References
For more information on configuration and in-system programmability (ISP), see the
following sources:
AN 39: IEEE 1149.1 (JTAG) Boundary-Scan Testing in Altera Devices
AN 95: In-System Programmability in MAX Devices
Configuring Arria GX Devices chapter in volume 2 of the Arria GX Device Handbook
Configuring Cyclone FPGAs chapter in the Cyclone Device Handbook
Configuring Cyclone II Devices chapter in the Cyclone II Device Handbook
Configuring Cyclone III Devices chapter in volume 1 of the Cyclone III Device
Handbook
Configuring Stratix and Stratix GX Devices chapter in the Stratix Device Handbook
Configuring Stratix II and Stratix II GX Devices chapter in volume 2 of the Stratix II
Device Handbook
Configuring Stratix III Devices chapter in volume 1 of the Stratix III Device Handbook
In-System Programmability Guidelines for MAX II Devices chapter in the MAX II
Device Handbook
Programming & Configuration chapter in the Introduction to the Quartus II Software
manual
Quartus II Programmer chapter in volume 3 of the Quartus II Handbook
Serial Configuration Devices (EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128) Data
Sheet chapter in the Configuration Handbook
Programming module of the Quartus
®
II online tutorial
Table 2–8. Table of Hazardous Substances’ Name and Concentration (Note 1)
Part Name
Lead
(Pb)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr6+)
Mercury
(Hg)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl Ethers
(PBDE)
Electronic
Components
0 0 0 0 0 0
Populated
Circuit Board
00 0 0 0 0
Manufacturing
Process
00 0 0 0 0
Packing 0 0 0 0 0 0
Note to Table 28:
(1) 0 indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below
the relevant threshold of the SJ/T11363-2006 standard.