User manual

Chapter 2: USB-Blaster Specifications 2–9

References

■ Refer to the following glossary definitions in the Quartus II Help:

■ “USB-Blaster Cable” (general description)

■ “Configuration scheme” (general description)

■ “Programming files” (general description)

■ Refer to the following procedures in the Quartus II Help:

■ Programming a Single Device or Multiple Devices in JTAG or Passive Serial

Mode

■ Programming a Single Device in Active Serial Programming Mode

■ Refer to the following introduction and overview topics in the Quartus II Help:

■ Programmer Introduction

■ Overview: Working with Chain Description Files

■ Overview: Converting Programming Files