User guide

Altera Corporation 11
Exercise 1: Review the Filtering Lab Design
Table 2 lists the parameters for the NCO_1MHz block that you
can set in the Implementation tab.
3. When you are finished reviewing the parameter settings, click
Cancel to close the Parameterize - NCO Compiler MegaCore
Function dialog box.
4. Close the window to exit IP Toolbench.
Table 2. NCO_1MHz Compiler - Implementation Tab
Parameter Value
Under Device Family
Target Stratix II
Under Outputs
Single Output Select
Under Multi-Channel NCO
Number of Channels 1
Under Multiplier-Based Architecture
Use Dedicated Multiplier(s) Select
Clock Cycles Per Output 1