User guide

32 Altera Corporation
Stratix II Professional Filtering Lab
2. Connect the USB-Blaster cable to your PC and to the Stratix II
EP2S180 DSP development board’s 10-pin JTAG (J21) connector to
directly configure the EP2S180 FPGA, as shown in Figure 24.
1 Insert the USB-Blaster cable into J21, so that the cable end
labeled TARGET SIDE faces upward as shown in “JTAG
Connector (J21) and USB-Blaster Cable” on page 32.
Figure 24. JTAG Connector (J21) and USB-Blaster Cable