User guide

July 2009 Rev 0.06
Page 26 of 31
Hex Address: Name Description Bits Bit Description
001 1 Sweep (not implemented)
010 2 Calculated Patterns
011 3 Pulse/Bar
100 4 RP219 Pattern
101 5 SMPTE Bars
Others 100% Color Bars
1B SMPTE 352
INSERT
CONTROL
Allows bytes 3 and 4 of the
SMPTE352 packet to be set
15:8
7:0
Byte 4
Byte 3
1C LINE PATTERN
UPDATE 1
16 MSB for line pattern
update
15:0 Update Value
1D LINE PATTERN
UPDATE 2
16 LSB for line pattern
update
15:0 Update Value
1E LINE PATTERN
UPDATE ADDR
Adress and write enable for
pattern update
15
14:11
10:0
Write Enable
Reserved
Update adress
5.1.5 Clocking
Hex Address: Name Description Bits Bit Description
20 CLOCK STATUS:
ALTERA
Status of ALtera PLLs 15:3
2
1
0
Reserved
Active clock: specified whether
the receive (0) or PLL (1) clock
is for transmission
Tx PLL Locked
Rx PLL Locked
21 CLOCK
CONTROL:
ALTERA
Control Altera Clock
selection
15
14:0
Select PLL (1) or Rx (0) Clock
Reserved
5.1.6 Video Timing
Hex Address: Name Description Bits Bit Description
23 CONTROL
GENLOCK
Control Genlock Mode 15:2
1:0
Reserved
Select System Mode:
00 0 Use Received Video
Timing
01 1 Use Genlock timing
10 2 Freerun/User specified
timing
11 3 Use Genlock timing with
user specified format
24 GENLOCK
STATUS
Status of Gunlock Interface 15
14:12
Progressive video on reference
SD HD 3G Format