Specifications

AlterG M300 Medical Operations Manual Part Number 102508 Rev D
30
Figure 12. Left Side Console Controls
STEP 1: PREPARATION FOR EXERCISE.
Before pressing START, stand still on the surface of the treadmill belt.
Do not hold onto or support yourself on any part of the system
structure. The system weighs you prior to exercise and the treadmill
must support your full body weight.
STEP 2: BEGINNING THE EXERCISE SESSION.
Press START to begin the exercise session. The AlterG will proceed
with a calibration routine that allows the system to determine the
relationship between enclosure pressure and your body weight.
During this routine the display will say CAL and the single green LED
next to the word Calibrating will light. You will feel the pressure in the
bag change as the system calibrates. It is best to cross your arms
while the routine runs to avoid touching any part of the structure and
ruining the calibration.
The READY LED will light at the end of the calibration routine. The
Weight Control display will now read 100%, indicating you are at full
body weight on the surface of the treadmill. Power will be applied to
the treadmill and its’ displays will light and the buttons will become
functional.
STEP 3: ADJUST YOU BODY WEIGHT.
Adjust your body weight with the + and – button controls. Pressing –
decreases your body weight, pressing + increases your body weight.
Your body weight is displayed as a percentage of your full body weight.
You can adjust your body weight at anytime during your exercise
session.
Press START to
begin
Press + to increase
body weight
Press STOP to
end exercise
Press - to decrease
body weight
Press PAUSE to
pause treadmill
LED’s display % of
your full body weight