User's Manual
40
Setup
Figure 14: FiberGateway Typical usage scenario - Home network connections
Connection
Description
C1
RJ11 Telephone cable
C2
Ethernet Cable UTP CAT5,6 cable (direct or crossover)
C3
12V DC Adapter
C4
Single-mode Optical Cable with SC/APC Connector (GPON)
W1
Wi-Fi
Tabel 12: Connections description
4.4 Before installing the FiberGateway equipment
4.4.1 Safety Warnings
• Check for site’s environmental conditions and look for power and optical access points nearby;
• Do not install the device in environments where the temperature or humidity exceeds the
standard limits;
• This device is a passive cooling device. To prevent equipment overheating do not obstruct the
ventilation grids on of the equipment;