User's Manual

41
Setup
• The FiberGateway device is not designed for outdoor setup. Please place it in a convenient
indoor/cabinet environment;
• Use only the provided power kit. The use of a third party power adapter may not guarantee its
proper operation;
• To avoid eye hazard, never look directly into a fiber optic port or connector;
4.4.2 Wireless network installation best practices
In order to achieve FiberGateway wireless network best performance the following installation rules
should be observed:
• FiberGateway front side should be oriented towards the area where the wireless network is to
be used;
• FiberGateway installation place should be at least 1 meter high and without :
o Interference sources nearby, such as Microwave ovens, DECT 2.4 GHz phones,
Audio/Video transmitters, Bluetooth equipment, Baby Monitors, etc.
o Obstacles such as walls, stairs, ceilings, doors, Metal Objects, Windows, etc between the
installation place and the Wi-Fi usage area.
4.5 Connections
FiberGateway connections are located at the back side of the equipment; WPS and INFO (for status
LEDS information) push buttons, are located at the front side of the equipment, Figure 12: FiberGateway
connectivity general view
4.6 FiberGateway Setup
FibeGateway is intended to be installed on a flat surface.
The following table identifies the set of materials that may be required to install the equipment,
depending on the home network scenario.
Installation phase Item Supplied Mandatory
Powering
Power Adapter and Power Cord
230VAC/50Hz or 110VAC/60Hz 12VDC
(4A) + 15%
(1)

Network Provider
Connection
Optical Patchcord (SM fibre ITU-T
G.657B3) with connectors SC/APC
(1)

Optical connector cleaning kit -

Home Network
Connections
Ethernet cables CAT6 568B (1) (2)
RJ11 Telephone Cable (1) (2)
Device with Wi-Fi connectivity
(laptop/smartphone/ …)
- (2)
Tabel 13: material required for instalation
(1) Depending on the ordered model
(2) Home network scenario dependent