User's Manual

86
WebGUI
Group
Parameter Description
Firewall and
DMZ
Enable firewall
Flag:
On – Active Firewall
Off – Inactive Firewall
Enable firewall IPv6
Flag:
On – Active Firewall
Off – Inactive Firewall
Ativa/inativa DMZ On/Off
Flag:
On – DMZ active
Off – DMZ inactive
DMZ server DMZ Server IP Address
Tabel 34: Security - Parameters
6.3.1.2 Access window
The Security Access information in effect on FiberGateway is displayed in the main window when the
security submenu item, "Access" is selected.
Figure 70: Functional Menu - Access
aIn this window it is possible to route ports and their activation. Note that: "The abuse of port ranges
may reduce the performance of the device. The maximum allowed range is 100 ports ".
The Security Access information in effect on FiberGateway is displayed in the window, Figure 52 when
the Security submenu item, "Access" is selected. This information is organized into two groups:
• Port forwarding
• Activation of ports
In each group, the safety access rules (respectively, Port Forwarding Tabel and Port Activation Tabel)
in force are shown in each group.
Editing security accesses and creating new access rules is possible in each group by using the "+ create
rule" buttons.
The "+ create rule" buttons when selected open an edit window where you can enter the values of the
parameters of the new access rule configuration (mandatory input parameters are checked). The
creation of the new rule will be completed by the "create" button in the lower right corner of the edit
window.