User's Manual

89
WebGUI
Group
Parameter Description
Port Forwarding
Interface Identification of the WAN interface.
Service Identification of the service
Server IP address Service server address
Protocolo Transport Protocol
External ports External ports ID
Internal ports ID of internal ports
Tabel 35: Security - Port forwarding
6.3.1.2.2 Ports activation
In the port activation window it is possible to activate internal and external ports and protocols (TCP,
UDP). It means that it is possible for one protocol and external port to be activated different internal port.
In Anglo-Saxon terminology the term used for port activation is port triggering
Figure 73: Access - Create port activation rule
The following figure shows all the possible fields to be changed, related to the activation of ports. To
access this functionality, select the "+ create rule" field. The interface where these routing is done is the
WAN interface eroute0.
By selecting the "Application name" field, a set of predefined applications is available, as well as the
possibility of creating a new application. In this case it is necessary to define the application name in the
"Define an application" field. In all other fields the parameters to be changed are the same as those of
the predefined applications.
The parameters to be changed are "Active Ports", protocol (TCP/UDP, TCP, UDP), "Forward Ports" and
Enable rule.