User guide
MAXCS ACC 6.7.1 Administration Manual 215
C HAPTER
17
AltiGen IP Phone Configuration
AltiGen manufactures a series of IP phones. The system administrator can control and
program the following areas for each type of AltiGen IP phone:
• Specify the server IP address that the IP phone needs to register
• Protect the IP phone configuration with a password
• Prevent the user from changing the configuration from the IP phone
• Configure the Trunk Access (Route Access) code
• Configure the time zone and time format
• Specify the TFTP server for firmware updates
• Force the IP phone to reset and download new firmware
• Set SIP transport settings for SIP security
• Enable SIP telephony service for a selected third-party SIP device
• Configure programmable keys
• Allow the IP phone to receive workgroup real time status
• Allow the phone to auto-discover the server’s IP address
To configure the AltiGen IP phone, select PBX > AltiGen IP Phone Configuration.
This opens the AltiGen IP Phone Configuration window, where, after setting up an IP
extension, you can set parameters for the extension.