User guide
Table Of Contents
- About This Manual
- Overview
- Technology Enhancements in Release 5.1
- SIP Implementation
- Multi-Site Enterprise Management - AltiEnterprise Manager
- Multi-Chassis Gateway Support (ACM only)
- Capacity Improvements
- Voice Processing New Features and Enhancements
- PBX New Features and Enhancements
- Call Center New Features and Enhancements
- Client Application New Features and Enhancements
- IP Phone New Features and Enhancements (IP600, IP710, IP705)
- Key System Features
- Technology Enhancements in Release 5.1
- Software Installation & License Registration
- Getting Around AltiWare Administrator 5.1
- System Configuration
- Setting General Parameters
- Setting a System Number Plan
- Setting Business Hours
- Routing Calls on Holidays
- Configuring System Speed Dialing
- Defining System Call Restrictions
- Creating Account Codes
- Setting up Call Reports
- Country-Relevant Settings
- Audio Peripheral Configuration
- Activity
- Feature Profiles
- CT-Bus Configurations
- Voice Mail Configuration
- Auto Attendant Configuration
- Board Configuration
- Using the Triton Resource Board
- Using the Triton MeetMe Conference Board
- Configuring the Quantum Board
- Configuring the Triton Analog Station Board
- Configuring the Triton Analog Trunk LS/GS and LS Boards
- Configuring the Triton VoIP Board
- Configuring the Triton T1/E1 Board
- Configuring Virtual Boards SIPSP and H323SP
- Configuring the MAX Board
- Configuring the Virtual MobileExt Board
- Trunk Configuration
- Trunks Out of Service
- Channel Identification
- Opening the Trunk Configuration Window
- Selecting Trunks to Set Attributes
- Configuring One or Multiple Trunks
- Setting General Trunk Attributes
- H323 Tie Trunk Properties
- SIP Tie Trunk Properties
- SIP Trunk Properties
- Triton T1/E1 Trunk Properties
- Triton Analog Trunk GS/LS Properties
- Quantum Trunk Properties
- Incoming Call Routing
- Outgoing Call Blocking
- In Call Routing Configuration
- Out Call Routing Configuration
- Extension Configuration
- Setting Up IP Extensions
- AltiGen IP Phone Configuration
- Mobile Extension Configuration
- Hunt Group Configuration
- Paging Group Configuration
- Line Park Configuration
- Workgroup Configuration
- Managing and Using MeetMe Conference
- Network Configuration Guidelines for VoIP
- Enterprise VoIP Network Management
- Understanding VoIP Bandwidth Requirements
- Opening AltiEnterprise Manager
- Setting VoIP Codec Profiles
- Assigning Codec Profiles to IP Addresses
- Defining IP Networks
- Defining the IP Dialing Table
- The Multi-site VoIP Domain
- Working with Servers in the VoIP Domain
- Managing VoIP Domain Users
- Configuring Global Least Cost Routing
- When Information May Be Out of Sync
- System Report Management
- Tools and Applications
- E1-R2 and E1 ISDN PRI Installations
- Required Service Parameters
- Network Ports
- Technical Support & Product Repair Services
- Troubleshooting
- Index
AltiWare ACC 5.1 Administration Manual 253
C
HAPTER
19
Managing and Using MeetMe
Conference
AltiWare provides two different types of conference bridges, Station and MeetMe
Conference. Station conferencing is handled from the phone or the desktop client on the
fly and requires no configuration in AltiWare Administrator.
The MeetMe Conference is a group conferencing feature that requires the following:
• A phone meeting needs to be scheduled first by the conferencing host through the
client application, or by the system administrator in AltiWare Administrator.
• All participating parties need to dial into the MeetMe conference extension number
and enter the Meeting ID (and, optionally, password) to join the conference.
Hardware requirements:
• For all OFFICE Chassis series, a 30-port Triton MeetMe conference board (ALTI-
CONF-30) is required.
• Only one Triton MeetMe conference board is supported per system.
• MAX1000 server has a built-in MeetMe conference (12-port) resource in the
embedded DSP. No additional hardware is required.
MeetMe Conference Features
• Multiple meetings can be held at the same time, as long as the reserved resources
do not exceed 30. (For the MAX1000 system, the reserved resources cannot exceed
12, and up to two meetings can be held at the same time.)
• Meetings can be set up and administered in AltiView/AltiAgent and AltiWare
Administrator.
• You can set up a single meeting or a meeting that recurs at regular intervals.
• MeetMe Conference creates an invitation to a meeting, and offers the option to open
Microsoft Outlook to send the invitation to people you specify.
• Option to announce participant's name when joining or leaving the conference. This
feature can be configured by the meeting scheduler.
• Meeting host can Mute/Un-Mute, and drop meeting participants using the desktop
client.
• Meeting host can surrender the meeting control to another extension.