DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0045-004 PRODUCT REVISION: 3 DA1907SX 1-IN, 2-OUT VGA/SVGA/XGA DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Altinex appreciates your purchase of the DA1907SX Distribution Amplifier. We are sure you will find it a reliable and useful product. PRECAUTIONS / SAFETY WARNINGS................2 GENERAL ..........................................................2 Superior performance for the right price backed by solid technical and customer support is what we have to offer. RACK-MOUNT SAFETY GUIDELINES ..............2 INSTALLATION ..........................
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your DA1907SX Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1907SX and to prevent fire and shock hazard. Please read them carefully and heed all warnings. • • 1.1 GENERAL • • • Unauthorized personnel shall not open the unit since there are high-voltage components inside.
DISTRIBUTION AMPLIFIERS MECHANICAL DA1907SX Material 0.1” Al Finish Gray Top Panel Lexan Height (inches) 3.00in (76mm) Width (inches) 4.50in (114mm) Depth (inches) 1.00in (25mm) Weight (pounds) 0.40lb (0.18kg) Ship Weight (pounds) 2.4lbs (1.09kg) T° Operating 10°C-35°C T° Maximum 50°C Humidity 90% non-condensing MTBF (calculations) 40,000 hrs Table 2.
DISTRIBUTION AMPLIFIERS d DESCRIPTION OF DA1907SX 4 4.1 INPUT PIN 12 No. 13 14 15 The Computer Input connector of DA1907SX is connected to the Video output of the laptop or desktop computer. The DA1907SX is provided with a 3 foot Male to Male VGA Input cable (ALTINEX part # CB3703MR). A longer input cable may be used but lengths over 15 feet are generally not recommended to preserve the signal quality. If desired, the HD-15 input can be easily adapted to 5-BNC connector output with a proper cable.
DISTRIBUTION AMPLIFIERS PIN No. 13 14 15 4.3 LED INDICATOR Main Output signals on 15-pin HD female connector Horizontal Sync Vertical Sync Ground The DA1907SX offers a special LED on the front panel that provides feedback to the user. When power is connected to the DA1907SX, the LED will turn red. When an active computer source is connected to the DA1907SX, the LED will turn Green, indicating that it is receiving a signal by sensing the presence of the sync portion of the signal. PIN No.
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DISTRIBUTION AMPLIFIER CONGRATULATIONS! YOU ARE DONE. 6 If you experience any problems, please call 1-800-258-4623 or 1-714-990-2300 for international calls. Step 1. Connect the 9V 500mA AC adapter’s output plug to the DA1907SX’s power input connector - 2.5 mm DC Jack. Verify that a red LED is displayed in the top right corner of the unit on the front panel.
DISTRIBUTION AMPLIFIERS MS8102CA MS8104CA MS8105CA MS8106CA MS8112CA MS8114CA PS5502US PS5512UK PS5522AU PS5532GR PS5542JP VGA TO RGB ADAPTER CABLES 15 pin HD Male to 5 BNC Male, 6ft 15 pin HD Male to 5 BNC Male, 15ft 15-pin HD Male to 5 BNC Male, 50 ft 15 pin HD Male to 5 BNC Female, 6 ft 15 pin HD Female to 5 BNC Male, 6ft 15 pin HD Female to 5 BNC Male, 15ft POWER SUPPLIES 9V 500mA Power Supply for US 9V 500mA Power Supply for UK 9V 500mA Power Supply for Australia 9V 500mA Power Supply for Germany 9V 5
DISTRIBUTION AMPLIFIERS ALTINEX POLICY If your product is out of warranty and needs service, contact the Altinex Sales Department for an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before the actual repairs are done. 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service.