User`s guide

AC301
AC301AC301
AC301-
--
-201
201201
201 User’s Guide
400-0446-002
7
7.2 Connection Examples
Following are connection examples using AVSnap and HyperTerminal:
Example - AVSnap:
1. Launch AVSnap and enter "Communication Mode."
2. Right click in the terminal window and select "Page Setup."
3. Under the COM Setup, select the TCP option. Enter the IP address
for the Host and port number (10001 is the default from above) for
the Port.
The IP address 192.168.1.100 is only an example. Your IP address will
vary depending on your network settings.
Example - HyperTerminal:
1. Launch HyperTerminal and start a new connection. This example
uses the connection name "AC301-201" and HyperTerminal version
5.1 running under Windows XP.
2. Select "Connect Using: TCP/IP" and then enter the IP address and
port number.