DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0003-003 PRODUCT REVISION: 1 DA1203RM 1-IN, 3-OUT RGBS DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Thank you for purchasing the DA1203RM Video Distribution Amplifier. We are sure you will find it reliable and simple to use. PRECAUTIONS / SAFETY WARNINGS ...............2 GENERAL ................................ .......................... 2 Superior performance for the right price, backed by solid technical and customer support is what Altinex has to offer. RACK MOUNT SAFETY GUIDELINES..............2 INSTALLATION..............................
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS to a table or wall, use only Altinex made mounting accessories (Rack Mount Shelf DA1298FC, Rack Mount Ears DA1299RM) and cables for optimum setup. 1 Please read this manual carefully before using your DA1203RM Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1203RM and to prevent fire and shock hazard. Please read them carefully and heed all warnings.
DISTRIBUTION AMPLIFIERS • TECHNICAL SPECIFICATION Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment. 3 FEATURES/DESCRIPTION DA1203RM GENERAL 1 Inputs Input Connector 4-BNC Female 3 Outputs Output Connectors Three 4-BNC Female High resolution RGBS, Compatibility RGsB and RsGsBs, Component, S-Video and Composite Video Table 1.
DISTRIBUTION AMPLIFIERS Minimum Video Bandwidth 350MHz @ -3dB Typical Video Bandwidth 380MHz @ -3dB 3dB @120MHz Cable Equalization DC Coupling -40dB @10MHz Cross-talk Power Internal Power Supply 90-140V/200-240V 10 watts max. Power Consumption Table 3.
DISTRIBUTION AMPLIFIERS 4.3 VIDEO LEVEL SWITCH 4.1 SYNC POLARITY SWITCH The Video Level Switch can be set to either the standard 0.7V output or to 1.0V output. When the switch is set in the 1.0V output position, this provides approximately a 35% increase in the video signal level. This can be used in installations where cable runs exceed 150 feet. It is not recommended that this switch be set in the 1.
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DISTRIBUTION AMPLIFIER OPERATION 6 Step 1. Make sure that the proper power supply is being used with the DA1203RM. Note: The use of an incorrect power supply can result in equipment damage not covered by warranty. Step 2. Connect the power cord to the DA1203RM and plug it into the power outlet. The power indicator LED on the front panel will light. This indicates that the unit is operational. Step 3. Step 5.
DISTRIBUTION AMPLIFIERS FREQUENTLY ASKED QUESTIONS No. 1 Question What is a Distribution Amplifier? 2 When do I use the DA1203RM? 3 4 Which signal formats can be passed through? When do I use “+” position of the Sync Polarity switch? 5 When do I use the Sync Level switch? 6 What do I have when the Video Level switch is set in the 1.
DISTRIBUTION AMPLIFIERS ALTINEX POLICY If your product is out of warranty and needs service, contact the Altinex Sales Department for an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before the actual repairs are done. 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service.
