DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0025-003 PRODUCT REVISION: 3 DA1226AT 1-IN, 6-OUT RGBHV DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Thank you for purchasing the DA1226AT Distribution Amplifier. We are sure you will find it a reliable and useful product. PRECAUTIONS / SAFETY WARNINGS ...............2 GENERAL ................................ .......................... 2 Superior performance for the right price backed by solid technical and customer support is what we have to offer. RACK MOUNT SAFETY GUIDELINES..............2 INSTALLATION................................ .....
DISTRIBUTION AMPLIFIERS 1 • Please read this manual carefully before using your DA1226AT Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1226AT and to prevent fire and shock hazard. Please read them carefully and heed all warnings. • PRECAUTIONS / SAFETY WARNINGS 1.1 GENERAL • • Unauthorized personnel shall not open the unit since there are high-voltage components inside.
DISTRIBUTION AMPLIFIERS • cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications to this unit not expressly approved by Altinex Inc. could void the user’s authority to operate the equipment. MECHANICAL Material Finish Front/Back panels Height (inches) Width (inches) DA1226AT 0.1” Al Gray Lexan 1.75in (44mm) (1U) 17.0in (432mm) (1 rack wide) Depth (inches) 4.50in (114mm) Weight (pounds) 5.0lbs (2.
DISTRIBUTION AMPLIFIERS DESCRIPTION DIAGRAM 4 4
DISTRIBUTION AMPLIFIERS APPLICATION DIAGRAM 5 INSTALLATION 6 Step 1. Please attach the Interface on the rack or table using the optional hardware. Step 2. The DA1226AT may be used with either 110V or 220V and offers a universal IEC connector for ease of use throughout the world. Before plugging in the power cord to the unit, please verify that the voltage rating of 110V/220V on the FUSE CLIP located at the rear of the unit is the same as the voltage rating on the power outlet.
DISTRIBUTION AMPLIFIERS OPERATION 7 5BM01005BM CB500PL5BM01505BM CB500PL5BM02005BM CB500PL5BM02505BM The DA1226AT will operate successfully as long as cables are attached correctly and other technical specifications are followed. There are no other adjustments necessary to operate the unit. ACCESSORIES Model No.
DISTRIBUTION AMPLIFIERS FREQUENTLY ASKED QUESTIONS No: 1 Question How many feet of cable can I use with the DA1226AT? 2 Does the DA1226AT offer buffered outputs? What is meant by buffered output? 3 4 5 6 Which type of format signal may I pass through the DA1226AT? Can I use CAT-5 cables instead of coaxial cables? What is the maximum resolution of input video signal that can pass through DA1226AT? 9 Answer The outputs of the DA1226AT allow signals to be driven through 10 feet or more of cable de
DISTRIBUTION AMPLIFIERS ALTINEX POLICY If your product is out of warranty and needs service, contact the Altinex Sales Department for an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before the actual repairs are done. 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service.