DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0078-003 PRODUCT REVISION: 1 DAA0106-V0A2 1-IN, 6-OUT AUDIO DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Altinex appreciates your purchase of the DAA0106V0A2 Distribution Amplifier. We are sure you will find it to be a reliable and useful product. PRECAUTIONS / SAFETY WARNINGS ...............2 GENERAL ................................ .......................... 2 RACK MOUNT SAFETY GUIDELINES..............2 INSTALLATION................................ ..................2 CLEANING................................ .........................
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS • Handle the DAA0106-V0A2 Distribution Amplifier carefully because dropping or jarring can damage internal components. • Do not place heavy objects on top of the DAA0106-V0A2. If the is to be mounted to a table or wall, use only Altinex made mounting accessories, such as rack mount shelf (DA1293FC, DA1294FC) and cables for optimum setup. • To turn off the main power, be sure to remove the cord from the power outlet.
DISTRIBUTION AMPLIFIERS cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. MECHANICAL Audio Material 0.1” Al Finish Gray Top Panel Lexan Height (inches) 1.75in (44mm) Width (inches) 8.50in (216mm) Depth (inches) 4.93in (125mm) Weight (pounds) 2.0lbs. (0.91kg) Ship Weight (pounds) 4.0lbs. (1.
DISTRIBUTION AMPLIFIERS DESCRIPTION OF DAA0106-V0A2 4 4
DISTRIBUTION AMPLIFIERS APPLICATION DIAGRAM 5 5
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DISTRIBUTION AMPLIFIER OPERATION 7 6 The DAA0106-V0A2 will operate successfully as long as cables are attached properly and other technical specifications are followed. Step 1. Connect the power cord to the unit and plug it into the power outlet. The power indicator LED on the front panel will light. This indicates that the unit is operational. 7.
DISTRIBUTION AMPLIFIERS ACCESSORIES 8 FREQUENTLY ASKED QUESTIONS Model No.
DISTRIBUTION AMPLIFIERS TROUBLESHOOTING GUIDE If the product has been opened, the restocking fees will apply. For the restocking fee amount, please contact an Altinex Sales Representative. 10 • Please make sure that the audio voltage level is less than 10V p-p. • Make sure to use the correct power cable with the appropriate connector for the country in which it is being used.
