DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0066-003 PRODUCT REVISION: 2 DA1322AT 1-IN, 2-OUT RGBHV DISTRIBUTION AMPLIFIER (W/EQ & GAIN) USER’S GUIDE
DISTRBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Thank you for purchasing the DA1322AT Distribution Amplifier. We are sure you will find it a reliable and useful product. PRECAUTIONS / SAFETY WARNINGS ...............2 GENERAL ..........................................................2 Superior performance for the right price backed by solid technical and customer support is what we have to offer. RACK MOUNT SAFETY GUIDELINES ..............2 INSTALLATION........................................
DISTRBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS to a table or wall, use only Altinex made mounting accessories (Rack Mount Shelf DA1293FC, Rack Mount Ears DA1294FC) and cables for optimum setup. 1 Please read this manual carefully before using your DA1322AT Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1322AT and to prevent fire and shock hazard. Please read them carefully and heed all warnings.
DISTRBUTION AMPLIFIERS • Component, S-Video and Composite Video Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment. Table 1. DA1322AT General MECHANICAL DA1322AT Material 0.1” Al Finish Gray Top Panel Lexan Height (inches) 1.75in (44mm) Width (inches) 8.50in (216mm) Depth (inches) 4.50in (114mm) Weight (pounds) 2.0lbs (0.91kg) Ship Weight (pounds) 3.2lbs (1.
DISTRBUTION AMPLIFIERS @ 100MHz (on) DC Coupling -40dB @10MHz Cross-talk Power Internal Power Adapter 95-240 V Continuous 10 watts max. Power Consumption Table 3.
DISTRBUTION AMPLIFIERS 4.1 INPUT/OUTPUTS 4.3 SYNC CONTROL SWITCHES The outputs of the DA1322AT allow signals to be driven through 100 feet or more of cable depending on cable quality and the source signal resolution. The DA1322AT uses 5-BNC connectors for each input and output representing red, green, blue, and separate horizontal and vertical sync. When passing an RGBS format signal, simply use the horizontal channel to pass composite sync.
DISTRBUTION AMPLIFIERS INSTALLATION 6 Step 1. Connect the power cord to the unit and plug it into the power outlet. The power indicator LED on the back panel will light. This indicates that the unit is operational. Step 2. Connect the video output of the source (computer or other high-resolution source) to the input of the DA1322AT using a high quality coaxial-type cable.
DISTRBUTION AMPLIFIERS MS8102CA MS8104CA MS8105CA MS8112CA MS8114CA PS5301US PS5302UK PS5303AU PS5304GR FREQUENTLY ASKED QUESTIONS No: 1 Question How many feet of cable may I use with the DA1322AT? 2 Are the outputs of the DA1322AT buffered? What is meant by buffered output? 3 4 5 cat 5 cable instead of coaxial cable? VGA TO RGB ADAPTER CABLES 15-pin HD Male to 5 BNC Male, 6ft 15-pin HD Male to 5 BNC Male, 15ft 15-pin HD Male to 5 BNC Male, 50 ft 15-pin HD Female to 5 BNC Male, 6ft 15-pin HD Female
DISTRBUTION AMPLIFIERS ALTINEX POLICY If your product is out of warranty and needs service, contact the Altinex Sales Department for an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before the actual repairs are done. 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service.
