DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0016-003 PRODUCT REVISION: 2 DA1506RT 1-IN, 6-OUT VGA DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Thank you for purchasing the DA1506RT Distribution Amplifier. We are sure you will find it a reliable and useful product. PRECAUTIONS / SAFETY WARNINGS ...............2 GENERAL ................................ .......................... 2 Superior performance for the right price backed by solid technical and customer support is what we have to offer. RACK MOUNT SAFETY GUIDELINES ..............2 INSTALLATION................................ ....
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your DA1506RT Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1506RT and to prevent fire and shock hazard. Please read them carefully and heed all warnings. • Do not place heavy objects on top of the DA1506RT.
DISTRIBUTION AMPLIFIERS user will be required to correct the interference at his own expense. • MECHANICAL DA1506RT Material 0.1” Al Finish Gray Top Panel Lexan Height (inches) 1.75in (44mm) Width (inches) 8.50in (216mm) Depth (inches) 4.50in (114mm) Weight (pounds) 2.0lbs (0.91kg) Ship Weight (pounds) 3.2lbs (1.45kg) T° Operating 10°C-35°C T° Maximum 50°C Humidity 90% non-condensing MTBF (calculations) 40,000 hrs Table 2.
DISTRIBUTION AMPLIFIERS DESCRIPTION OF DA1506RT 4 4.1 INPUT AND OUTPUTS PIN Input signals on 15-pin HD female No. connector 1 Red 2 Green 3 Blue 4 ID Bit 1 (Grounded when ID Bit switch is ON) 5 Ground 6 Ground 7 Ground 8 Ground 9 No connection 10 No connection Using female 15-pin HD (VGA-type) connectors on all input and output connectors, the DA1506RT can be used with readily available VGA-type cables.
DISTRIBUTION AMPLIFIERS PIN Input signals on 15-pin HD female No. connector 11 ID Bit 2 (Grounded when ID Bit switch is ON) 12 ID Bit 3 (Grounded when ID Bit switch is ON) 13 Horizontal Sync 14 Vertical Sync 15 ID Bit 4 (Grounded when ID Bit switch is ON) Table 4. The DA1506RT Input pin-out 4.2 BOOT UP SWITCHES Some video cards require proper sense ID pins to determine boot up mode. Sense pins are usually present on VGA video cards.
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DISTRIBUTION AMPLIFIER OPERATION 6 Step 1. Make sure that the power input is set to the proper AC voltage in your country. Incorrect settings can result in equipment damage not covered by warranty. If the power input voltage needs to be modified, remove the fuse portion of the power entry module and change the location of the fuse. Note that the correct voltage is visible through the voltage designation window. Step 2.
DISTRIBUTION AMPLIFIERS ACCESSORIES 8 FREQUENTLY ASKED QUESTIONS Model No. Description TABLE MOUNT BRACKET 1 U High, ½ rack units TM1271 1 U High, ½ rack units w/Computer TM1272 Input 1 U High, ½ rack units w / Computer + TM1273 A / V Inputs 1 U High, ½ rack units w / Computer + TM1274 A / V + Power Inputs RACK MOUNTING ACCESSORIES DA1293RM 19”-1U Rack Mount Shelf (2- Units) DA1294RM 19”-1U Rack Mount Ears for single unit.
DISTRIBUTION AMPLIFIERS TROUBLESHOOTING GUIDE 11.2 RETURN POLICY 10 It is very important to Altinex that you receive the products that you have ordered and that this product fulfills your needs. In the unlikely event that an Altinex product needs to be returned, please follow the policies below: We have carefully tested the supplied DA1506RT unit and have found no problems; however, we would like to offer the following suggestions : • Make sure that the power input is set to the proper AC voltage.
