Specifications

8
ALTINEX, Inc. • Toll Free: 800-ALTINEX • Tel: [phone] • Fax: [phone] • Web: www.altinex.com
19-Slot Enclosure
The MT100-100 enclosure consists of 19 slots, a power supply, and a backplane to route
power and control signals to the cards. On the back panel of the 19-slot enclosure is an
IEC-320 male power connector, an on-off switch, and a 9-pin D-sub female connector for
external RS-232 control. (RS-232 control is activated only when used in conjunction with a
front panel that provides control capability to the cards installed in the enclosure).
A front panel must be chosen with this enclosure; three are available, each with different
capabilities to complement the functionality of the cards used in the enclosure. Optionally, a
second power supply may be installed, either for redundancy in mission-critical applications
or if more power is required by a large number of scan conversion or scaling cards.
To keep dust out, unused slots should be covered by separately
available slot covers (MT200-105: package of five blank covers).
Slots Available 19 (20 for custom applications)
Weight (empty, no slot covers) 15 lb (6.8 kg)
Ship Weight (approx.) 20 lb (9.1 kg)
MTBF (calc.) 60,000 hrs
Rack Space (19") 4U high, 1 rack wide, 12" (30.5 cm) deep
Power Input 100-240 V AC (50/60 Hz), 2.0 A maximum
Power to Cards –13V, –6V, +6V, +13V
45 W maximum per power supply,
90 W with 2 power supplies installed; other options available
Power Consumption 20 W minimum/250 W maximum,
depending on power supply options installed
Approvals FCC and CE
Specifications
MT100-100
MT200-105
MT Book #3.qxd 3/19/03 5:02 PM Page 8