Specifications

®
• Use internal jumpers to set up for use as 2 x 6, 3 x 5, 4 x 4, 5 x 3, or 6 x 2 matrix
• Use multiple cards for multi-signal formats, i.e., two cards for S-Video, three for RGB or
component, five for RGBHV
• May be used as 1 x 3, 2 x 2 or 3x1 S-Video matrix using 2 BNCs per source (chroma/luma)
• Matrix switching is controlled via RS-232 commands through the MultiTasker enclosure,
or front panel control with a push-button front panel
• For S-Video sources, adapt two BNCs to a four-pin mini-DIN using ALTINEX
MS8132MG (12 inch/30.5 cm, four-pin mini-DIN male to two-BNC male) or ALTINEX
MS8133MG (12 inch/30.5 cm, four-pin mini-DIN female to two-BNC male)
Block Diagrams
Design Tips
ALTINEX, Inc. • Toll Free: 800-ALTINEX • Tel: [phone] • Fax: [phone] • Web: www.altinex.com
41
MT105-106
Video Projector
S-VHS
DVD
S-VHS
MS8133MG
MS8133MG
IN 5/OUT 4IN 1
MATRIX
IN 3/OUT 6IN 2 IN 4/OUT 5
OUT 2
IN 6/OUT 3 OUT 1
MT105-106
1
2
3
4
5
6
1
2
3
4
MATRIX
CONTROL
6x6
MATRIX SWITCHER
INPUT 1
INPUT 2
OUTPUT 1
OUTPUT 2
IN 6/OUT 3
IN 5/OUT 4
MALE BNC
MALE BNC
INPUT 6
INPUT 5
OUT 4
OUT 3
OUTPUT
INPUT 4
INPUT 3
5
6
OUT 6
OUT 5
IN 3/OUT 6
IN 4/OUT 5
MALE BNC
POWER
MT Book #3.qxd 3/19/03 5:04 PM Page 41