MULTI-TASKER MT105-102 is shown above.
MULTI-TASKER TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL.......................................................... 2 INSTALLATION ................................................. 2 CLEANING ........................................................ 2 FCC / CE NOTICE ............................................. 2 ABOUT YOUR MULTI-TASKER™ ........................ 3 TECHNICAL SPECIFICATIONS ........................... 3 PRODUCT DESCRIPTION ...................................
MULTI-TASKER PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT105-102/(103)/(105). Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT105102/(103)/(105) and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.
MULTI-TASKER ABOUT YOUR MULTI-TASKER™ 2 Outputs Output Connector Compatibility MT105-102/MT105-103/MT105-105 8-in 8-out Video Matrix Switcher Cards Composite Video (NTSC, PAL, SECAM) Using 2 Cards S-Video Using 3 Cards Component Video Using 4 Cards RGBS Using 5 Cards RGBHV Table 1. MT105-102/(103)/(105) General Using 1 Card The MT105-102/(103)/(105) is a 8-in 8-out Video Matrix Switcher Card designed for use with the Multi-Tasker.
MULTI-TASKER PRODUCT DESCRIPTION 4 4
MULTI-TASKER APPLICATION DIAGRAM 5 5 5
MULTI-TASKER Block Diagrams: Internal View of MT105-102 6 6
MULTI-TASKER INSTALLING YOUR MULTI-TASKER™ After processing a command, an OK or ER string will be returned as feedback if "F" is included at the end of a command string or if the unit ID is zero. Commands such as [ON], [OFF], and [IO] that end in "S" will be saved into memory. Commands not ending in "S" will still be executed but will not be restored when the system is reset (power off & power on again). 6 Step 1.
MULTI-TASKER Ui = Unit ID (i = # from 0 to 9) (refer to the MT100-100 user’s guide for explanation) Input2 is connected to Output7 and Output7 is disabled Input5 is connected to Output8 and Output8 is disabled Note: If there is no card in slot #2 of unit 3, sending the [C2U3] command will not return any feedback. Example: If one MT105-102 card is in slot #4 of unit 3: When sending command [VERC4U3], the MultiTasker™ Enclosure will return feedback as: MT105-102 690-0126-011. ERROR CODES 2.
MULTI-TASKER This command enables one or more outputs of a single card or group of cards. • m = output number (m =1 to 8) n = card ID No. (n = a slot # from 1 to 19) (1 to 8 for MT100-101 or 1 to 4 for MT100-103) P = path [ONmCnUiS]: for a single card This command enables output “m” without affecting any other outputs.
MULTI-TASKER [OFFC5U3]: Turns OFF all outputs, which is equivalent to [OFF12345678C5U3]. • Example: [OFF1C2U3F]: if path is not set [OFF1C2U3PF]: if path is set [OFFmGkUiS]: for a group of cards This command disables output "m" for each card in group "k" of unit "i". Command Format: [OFFmCnUiP] m = card output (m = # from 1-8) k = group number (k = # from 1-9) i = unit number (i = # from 0-9) S = saves command to memory 6.
MULTI-TASKER n = Card ID number (n = 1 to 19) (1 to 8 for MT100-101 or 1 to 4 for MT100-103) i = Unit ID number (i = 0 to 9) Note that all outputs will be connected to input1. • 12. [MATmmXnn] This command allows changes in the configuration of the matrix.
MULTI-TASKER O2c O2d Solution: Check the source and make sure that there is a signal present and all source connections are correct. If the source is working and there is still no display, see Cause 2. O2c O2d 13. [HELP] B) Cause 2: The card input is not selected. This command displays all available for user Multi-Tasker interface commands. Solution: Select the card input. See RS-232 accessible commands in section 7. If no display is present, see Cause 3. 7.3.
MULTI-TASKER ALTINEX POLICY 9 9.1 LIMITED WARRANTY Please refer to Altinex web site for details on product warranty. 9.2 RETURN POLICY Please refer to Altinex web site for details on return policy. 9.3 CONTACT INFORMATION ALTINEX, INC. 592 Apollo Street Brea, CA 92821 USA TEL: 714-990-2300 TOLL FREE: 1-800-ALTINEX WEB: www.altinex.com E-MAIL: solutions@altinex.