User`s guide

MULTITASKER
400-0226-004
15
Example:
There is an MT105-110 in slot 4. Currently,
Input 1 is connected to all outputs and all
outputs are on. The PATH command has been
used to set Input 2 to Output 1 and turn off
Output 2 and Output 3 at the same time. If
checking the status prior to sending the [SW]
command, the feedback will appear as follows
for the above connection settings:
In1-Out1 ON P=2
In1-Out2 ON P=OFF
In1-Out3 ON P=OFF
In1-Out4 ON
In1-Out5 ON
In1-Out6 ON
In1-Out7 ON
The notation "P=" at the end of the line indicates
the path condition is active. "P=2" on the
Output 1 line indicates that after the [SW]
command, Input 2 will be connected to
Output 1.
The notation "P=OFF" on lines 2 and 3 indicates
that Outputs 2 and 3 will be turned OFF after the
[SW] command is executed.
19. [SW] – SWITCH
This command immediately connects inputs and
outputs previously set with the PATH command.
The command switches all paths set on this
card and all other cards in the enclosure.
Example:
The following commands set the path for turning
on Output 1 of C6 and turning off Output 3 of
C7. Nothing happens until the [SW] command is
sent. At that time, Output 1 will be enabled and
Output 3 will be disabled.
[ON1C6P]
[OFF3C7P]
[SW]
20. [MATmXy]
This matrix command allows the matrix switcher
to be setup for different matrix sizes. The tables
below show how the inputs and outputs will be
configured when the matrix is changed for an
MT105-110.
Example:
In the 8x4 configuration, when Input 1 is
connected to Output 8, the entire channel, 1a
and 1b, will be switched to outputs 8a and 8b
respectively.
Command Format: [MATmXyCn]
m = Number of inputs (m = 16, 8, or 4)
y = Number of outputs (y = 8, 4, or 2)
Cn = Card ID (n = slot # from 1 to max slots)
16 X 8 8 X 4
IN OUT IN OUT
O9 O1 O1 O5a O1a O1a
O10 O2 O2 O5b O1b O1b
O11 O3 O3 O6a O2a O2a
O12 O4 O4 O6b O2b O2b
O13 O5 O5 O7a O3a O3a
O14 O6 O6 O7b O3b O3b
O15 O7 O7 O8a O4a O4a
O16 O8 O8 O8b O4b O4b
4 X 2
IN OUT
O3a O1a O1a
O3b O1b O1b
O3c O1c O1c
O3d O1d O1d
O4a O2a O2a
O4b O2b O2b
O4c O2c O2c
O4d O2d O2d