User`s guide

MULTI-TASKER™
16
16
24. [TEST]
This command performs a series of internal
tests on the internal memory.
Upon completion, the system will display
"MEMORY IS GOOD" if all tests pass.
Otherwise, failures will be indicated.
25. [HELP]
This command displays information available
for the Multi-Tasker interface commands.
Command Format: [HELPCnUi]
Cn = card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
In order to display the RS-232 commands
available for the MT109-100 card in slot 2, send
the command [HELPC2]. The commands
along with a brief description will be displayed
in the Terminal Window.
26. [WR]
This command groups multiple cards in the
Enclosure. Each unit contains a maximum of
nine groups.
In Multi-Tasker™ systems with audio and video
cards, boards are typically grouped as follows:
Group 1 = Video Cards
Group 2 = Audio Cards
Group 3 = Video and Audio Cards
If assigning group commands to button
functions, it is best to use the "Press and Hold
on Power Up" to make group settings.
Command Format: [WRCn…GkUi]
Cn = Card ID (n = slot # from 1 to max slots)
Gk = Group number (k = # from 1-8)
Ui = Unit ID (i = # from 0-9)
Example:
To group cards 1, 2, and 3 as group 5 of
Unit ID 1, send the command
[WRC1C2C3G5U1]. After executing this
command, cards 1, 2 and 3 will be grouped
together as group 5 of Unit ID 1.
27. [CLRG]
This command clears the members for a single
group or for all nine groups. The clear
command restores the cards to default settings.
Command Format: [CLRGkUi]
Gk = Group number (k = # from 1-8)
Ui = Unit ID (i = # from 0-9)
Example:
1) To clear group 1, send the [CLRG1U1]
command. This command clears the
members for the specified group only.
2) To clear all groups of Unit ID 1, send the
[CLRG[U1] command.
28. [RD]
This command displays the members in each
group.
Command Format: [RDGkUi]
Gk = Group number (k = # from 1-8)
Ui = Unit ID (i = # from 0-9)
Example:
The cards in slots 1, 2 and 19 are part of
group 5 in Unit ID 1. Read the member data for
group 5 of Unit ID 1, by sending the command
[RDG5U1]. The system will return feedback as
follows:
C1C2C19 G5U1
C1 = Card in Slot 1
C2 = Card in Slot 2
C19 = Card in slot 19
G5 = Group 5
U1 = Unit ID 1