User`s guide

MULTI-TASKER™
20
20
2: SETUP
1: SET INPUT VOLUME
1: INVOL1 (00)
2: INVOL2 (32)
3: INVOL3 (32)
4: INVOL4 (32)
5: INVOL5 (32)
6: INVOL6 (32)
7: INVOL7 (32)
8: INVOL8 (32)
ESC: ACCEPT
2: SET RAMP TIME
1: 04 Seconds
2: 06 Seconds
3: 08 Seconds
4: 10 Seconds
5: 12 Seconds
6: 14 Seconds
7: 16 Seconds
8: 18 Seconds
3: SET GROUP ID
1: ASSIGN GROUP ID
Use this command to add the card
to a group. If the groups is not
defined yet, it will be created.
1: Group 1
2: Group 2
3: Group 3
4: Group 4
5: Group 5
6: Group 6
7: Group 7
8: Group 8
2: DELETE GROUP ID
Use this command to remove all the
members from a group.
1: Group 1
2: Group 2
3: Group 3
4: Group 4
5: Group 5
6: Group 6
7: Group 7
8: Group 8
3: STATUS
Equivalent to the [C] command.
Returns the card status.
4: HELP
Equivalent to the [HELP] command.
Displays a list of commands available for
the MT109-100 along with a brief
description.
ESC
Returns to the parent menu.
7.4.5 MENU MODE EXAMPLES
All MENU MODE examples assume an
MT109-100 is installed in slot #1. Start by
clicking the mouse in the Terminal window.
Press ENTER and a list of available cards will
be displayed.
1. Select An Input
Follow the keystrokes below to select Input 3 as
the source input.
Enter List available cards
1 Select MT109-100 in slot #1
1 Select CONTROL Menu
5 Select Card/Group Select
0 Select This Card (card #1)
ESC Accept this selection
1 Select SWITCH sub menu
3 Select Input 3
ESC Return to CONTROL Menu
ESC Return to the MAIN Menu