User`s guide

MT109
MT109MT109
MT109-
--
-100
100100
100 User’s Guide
400-0095-007
18
7.4.5 Menu Mode Examples
All Menu Mode examples assume an MT109-100 is installed in slot 4
of unit ID 1.
Note: The communication software you use may echo each
character as it is typed when entering numeric values (not
selecting menu items). For example, entering a value of 03
may appear as 0033 on the screen.
1. Select An Input
Follow the keystrokes below to select Input 3 as the source input.
Enter List available systems
1 Select unit ID 1
04 Select MT109-100 in slot 4
1 Select Control Menu
1 Select Card/Group Select
0 Select This Card (card #1)
The Control menu will read This Card at the top.
ESC Return to Control menu
4 Select Switch sub-menu
3 Select Input 3
ESC Return to Control Menu
ESC Return to the Main Menu
2. Set Input 3 Gain Level
Start from the Main Menu and set Input 3 gain level to 16. Follow the
keystrokes below.
2 Select Setup Menu
2 Select Set Input Volume
3 Select Input 3 Volume
16 Enter 16
Note: The system may echo the 1 and the 6 entries
depending on the software settings.
ESC Return to Setup
ESC Return to the Main Menu
3. Set Output Volume
Start from the Main Menu and set the output volume level to 16 using
the keystrokes below.
1 Select Control Menu
5 Select Volume
1 or 2 Use "1" to increase and "2" to decrease until the desired
level is obtained.
ESC Return to Control menu
ESC Return to the Main Menu
4. Set Ramp Time
Start from the Main Menu and set the ramp time to 10 seconds using
the keystrokes below.
2 Select Setup Menu
3 Select Set Ramp Time
4 Select Ramp Time = 10 seconds
ESC Return to Setup menu
ESC Return to the Main Menu
5. Display Card Status
Start from the Main Menu and follow the keystrokes below.
3 Display card status
Note: The status will be displayed, followed by the Main
Menu being redisplayed.