User`s guide

MULTI-TASKER
11
11
If the status of audio card 5 of unit zero is as
follows:
VOLIN1:16
VOLIN2:21
VOLIN3:32
VOLOUT:12
BASS:8
TREBLE:14
LOUDNESS:ON
Send commands [SLOC5] [+] [+] [+] [+] [+].
After executing that command, send [C5] to get
the new status of card 5:
VOLIN1:16
VOLIN2:21
VOLIN3:32
VOLOUT:17
BASS:8
TREBLE:14
LOUDNESS:ON
• [SELmGkUi]
This command sets path to adjust the individual
volume level for a group of cards. Command
Format: [SLOGkUi] [–] [–] [–] [–] or [+] [+] [+] [+]
k = group number (k = # from 1-9)
i = Unit ID number (i = 0 to 9)
+ = increases volume. (maximum of 15 levels
for audio).
– = decreases volume. (maximum of 15 levels
for audio).
Example:
If card 1, 2, and 3 are grouped as group 5 of
unit 1, send the [SEL1G5U1] [–] [–] [–]
command to decrease the volume for card 1, 2,
and 3 simultaneously.
8. VLmAyCnUi]
This command sets absolute individual volume
level for single card. Command Format:
[VLmAyCnUi]
m = Input number (m = 1 to 3)
y = Absolute audio level (y = 1 to 32)
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
Example:
If the status of audio card 2 of unit zero is as
follows:
VOLIN1:16
VOLIN2:21
VOLIN3:32
VOLOUT:17
BASS:8
TREBLE:14
LOUDNESS:ON
Send commands [VL1A2CnUi], [VL2A12CnUi],
[VL3A18CnUi]. After executing the above
commands, send [C2] to get the new status of
card 2:
VOLIN1:2
VOLIN2:12
VOLIN3:18
VOLOUT:17
BASS:8
TREBLE:14
LOUDNESS:ON
• [VLmAyGkUi]
This command sets absolute individual volume
level for a group of cards. Command Format:
[VLmAyGkUi]
m = Input number (m = 1 to 3)
y = Absolute audio level (y = 1 to 15)
k = group number (k = # from 1-9)
i = Unit ID number (i = 0 to 9)
Example:
If card 1, 2, and 3 are grouped as group 5 of
unit 1, send the [VL2A32G5U1] command to set
maximum volume for card 1, 2, and 3
simultaneously.
9. [VLOAyCnUi]
This command sets absolute individual volume
level for single card. Command Format:
[VLOAyCnUi]
y = Absolute audio level (y = 1 to 32)
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
Example:
If the status of audio card 2 of unit zero is as
follows:
VOLIN1:16
VOLIN2:21
VOLIN3:32
VOLOUT:17
BASS:8
TREBLE:14