MULTI-TASKER™ MANUAL PART NUMBER: 400-0182-003 MT103-115 2-IN, 2-OUT CAT-5 TO VGA TRANSMITTER CARD FOR MULTI-TASKER™ USER’S GUIDE
MULTI-TASKER™ TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 GENERAL....................................................................2 INSTALLATION ...........................................................2 CLEANING ..................................................................2 FCC / CE NOTICE .......................................................2 ABOUT YOUR MT103-115 ................................... 3 TECHNICAL SPECIFICATIONS ..........................
MULTI-TASKER™ PRECAUTIONS / SAFETY WARNINGS 1.4 FCC / CE NOTICE 1 • Please read this manual carefully before using your MT103-115. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT103-115 and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.
MULTI-TASKER™ ABOUT YOUR MT103-115 2 TECHNICAL SPECIFICATIONS FEATURES/DESCRIPTION MT103-115 GENERAL Two Inputs Input from Transmitter RJ-45 Female Two Outputs Output Connectors 15-pin HD Female Cable Distance Limitations 640x480: 500ft/152m 1280x1024: 350ft/107m 800x600: 450ft/137m 1600x1200: 250ft/76m 1024x768: 400ft/122m MT103-115 2-In 2-Out VGA to CAT-5 Transmitter The MT103-115 is a 2-in 2-out VGA to CAT-5 transmitter card.
MULTI-TASKER™ PRODUCT DESCRIPTION 400-0182-003 4 4
MULTI-TASKER™ APPLICATION DIAGRAM 5 DIAGRAM 1: TYPICAL SETUP MT103-115 MT103-115 IN RED POWER/ GREEN SIGNAL 1 OUT OUT 2 RED POWER/ GREEN SIGNAL IN VGA TO CAT-5 TX DIAGRAM 2: INTERNAL VIEW POWER/ SIGNAL PRESENT VGA 400-0182-003 INPUT 1 CAT5 RJ45 OUT 1 INPUT 2 CAT5 RJ45 OUT 2 5
MULTI-TASKER™ 6 Cause 2: Card is not plugged in all the way. Step 1. Turn OFF the power to the Multi-Tasker™ enclosure. Solution: Push the card in all the way. If the LED is still not lit, see Cause 3. Step 2. Slide the MT103-115 into an available slot in the Multi-Tasker™. Make sure the card fits into place. Secure the card by tightening the retainer screws located on the top and bottom of the card. Cause 3: Card cage slot has a problem.
MULTI-TASKER™ ALTINEX POLICY 9 9.1 LIMITED WARRANTY/RETURN POLICY Please see the Altinex website at www.altinex.com for details on warranty and return policy. 9.2 CONTACT INFORMATION ALTINEX, INC 592 Apollo Street Brea, CA 92821 USA TEL: 714 990-2300 TOLL FREE: 1-800-ALTINEX WEB: www.altinex.com E-MAIL: solutions@altinex.
