INTERFACES MANUAL PART NUMBER: 400-0200-001 MX2100AV 2-IN 1-OUT VGA-UXGA + AUDIO SWITCHER W/ LOCAL USER’S GUIDE
INTERFACES TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL.......................................................... 2 RACK MOUNT SAFETY GUIDELINES.............. 2 INSTALLATION ................................................. 2 CLEANING ........................................................ 2 FCC / CE NOTICE ............................................. 2 ABOUT YOUR INTERFACE ................................. 3 TECHNICAL SPECIFICATIONS ...........................
INTERFACES PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MX2100AV Interface. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MX2100AV and to prevent fire and shock hazard. Please read them carefully and heed all warnings. • 1.1 GENERAL • • Unauthorized personnel shall not open the unit since there are high-voltage components inside.
INTERFACES void the user’s authority to operate the equipment. ABOUT YOUR INTERFACE TECHNICAL SPECIFICATIONS FEATURES/ DESCRIPTION GENERAL Inputs Stereo Audio Input Connector Computer Video Input Connector Outputs Video Output Connectors Audio Loop Output 2 There are several varieties of computers and computer video cards on the market today. There are also numerous data monitors and large screen data projectors.
INTERFACES Type CMRR Impedance Voltage Output Video Signals Analog Signal Impedance Output Sync Signals Composite, Horizontal & Vertical Sync Sync on Green Impedance Audio Output Signals Type Impedance Crosstalk Signal-to-Noise Ratio Bandwidth Stereo Channel Separation Frequency Compatibility Minimum Video Bandwidth Rise/Fall Time Power AC/DC Adapter Table 3. MX2100AV Electrical Differential >80dB @ 10 Hz to 20 kHz 10 k Ohms 10 V p-p, +/-5 Volts PIN INPUT SIGNALS ON 15-PIN HD FEMALE No.
INTERFACES 4.3 AUDIO 4.7 POWER REQUIREMENTS The MX2100AV accepts stereo audio input and offers balanced or unbalanced stereo audio output on a terminal block connector. There are two 3.5mm jacks for audio input, which may be returned to a local audio system with a 3.5mm jack for stereo audio loop output. The audio loop output jack is directly connected to audio input 1. A 5-pin terminal block is available for stereo audio transmission to the main sound system.
INTERFACES MX2100AV DESCRIPTION (CON’T) 4 FRONT PANEL BACK PANEL 6
INTERFACES APPLICATION DIAGRAM 5 7
INTERFACES INSTALLING YOUR INTERFACE Step 1. Step 2. Step 3. Step 4. Step 6. 6 OPERATION 7 1) Connect video and audio sources according to the Application Diagram in section 5, page 7. Please attach the MX2100AV Interface on the rack using the optional TM Series ALTINEX mounting brackets, through two screens on each side of the MX2100AV.
INTERFACES ACCESSORIES 8 cable 50 feet, 4 BNC to 4 BNC coaxial CB4150MR cable 75 feet, 4 BNC to 4 BNC coaxial CB4175MR cable 100 feet, 4 BNC to 4 BNC coaxial CB41100MR cable 150 feet, 4 BNC to 4 BNC coaxial CB41150MR cable 5 BNC TO 5 BNC COAXIAL CABLE CB4203MR 3 feet, 5 BNC to 5 BNC coaxial cable CB4206MR 6 feet, 5 BNC to 5 BNC coaxial cable 12 feet, 5 BNC to 5 BNC coaxial CB4212MR cable 25 feet, 5 BNC to 5 BNC coaxial CB4225MR cable 50 feet, 5 BNC to 5 BNC coaxial CB4250MR cable 75 feet, 5 BNC to 5 BNC c
INTERFACES ALTINEX POLICY an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before actual repairs are done. 10 10.1 LIMITED WARRANTY ALTINEX warrants that its products and cables are free from defects in materials under normal use and service.