User`s guide

SPECIAL APPLICATION
400-0384-002
21
43. [RDLM]
This command displays the data for one or all
memory location labels.
Command Format: [RDLMmCi]
m = Memory Location (m = 1 to 99, * for all)
Ci = Unit ID (i = # from 1 to 99)
Example:
Read back the contents of all the memory labels
by sending the command [RDLM*]. The
feedback will be in the following format:
MEM1:STOP
MEM2:PLAY
…
MEM99:NONE
44. [CLRM]
This command clears one or all RS-232 memory
location. The memory for the subroutines is not
affected.
Command Format: [CLRMmCi]
m = Memory Location (m = 1 to 99, * for all)
Ci = Unit ID (i = # from 1 to 99)
Example:
Clear the contents of all RS-232 memory
locations by sending the command [CLRM*].
The PE1005 will respond with the following
feedback:
ALL SUBS WILL BE CLEARED
PLEASE WAIT
Upon completion, the following message will be
displayed.
TASK COMPLETED
45. [CLRLM]
This command clears one or all RS-232 memory
location labels.
Command Format: [CLRLMkCi]
k = Memory Location (m = 1 to 99, * for all)
Ci = Unit ID (i = # from 1 to 99)
Example:
Clear the contents of all RS-232 memory
location labels by sending the command
[CLRLM*]. The PE1005 will respond with “OK”
when the labels are cleared.
COMMUNICATION
The next several commands deal with internal and
external communication.
46. [MODERSI]
This command is used to set the baud rate for
the internal RS-232 bus communication.
Command Format: [MODERSImCi]
m = Baud Rate bps
= 2400
= 4800
= 9600
= 19200
= 38400
Ci = Unit ID (i = # from 1 to 99)
Example:
Set the internal baud rate to 9600 baud by
sending the command [MODERSI9600]. Use
the [STATUS] or [RDRSI] commands to verify
this setting. In the status feedback, this setting
will be as follows:
Int Baud Rate:9600
The feedback from the [RDRSI] command will
simply be “9600”.
47. [RDRSI]
Reads baud rate for internal RS-232 bus
communication.
Command Format: [RDRSICi]
Ci = Unit ID (i = # from 1 to 99)
Example:
Send the command [RDRSI] to read back the
internal RS-232 baud rate. The feedback will be
similar to the following:
9600