SPECIAL APPLICATION MANUAL PART NUMBER: 400-0431-001 TP115-110 VGA/COMPONENT+ AUDIO TWISTED PAIR (UTP) TRANSMITTER
SPECIAL APPLICATION TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL..........................................................2 INSTALLATION .................................................2 CLEANING.........................................................2 FCC / CE NOTICE..............................................2 ABOUT YOUR TP115-110 ....................................... 3 TECHNICAL SPECIFICATIONS ............................ 3 DESCRIPTION OF PE1005 ...................
SPECIAL APPLICATION PRECAUTIONS / SAFETY WARNINGS • 1 Please read this manual carefully before using your TP115-110. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your TP115-110 and to prevent fire and shock hazards. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel or their authorized representatives must perform all service. 1.
SPECIAL APPLICATION ABOUT YOUR TP115-110 2 TECHNICAL SPECIFICATIONS TP115-110 VGA + AUDIO TO TWISTED PAIR (UTP) TRANSMITTER FEATURES/ DESCRIPTION GENERAL Inputs RGBHV/YPbPr Stereo Audio Output Video+ Audio Compatibility The TP115-110 provides a means of transmitting Computer video and audio signals over Twisted Pair (UTP) type cable when used together with an ALTINEX UTP video receiver, such as the TP115-111. The TP115-110 is compact and easy to use.
SPECIAL APPLICATION DESCRIPTION OF PE1005 400-0431-001 4 4
SPECIAL APPLICATION APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP TP115-110 TP115-111 400-0431-001 5
SPECIAL APPLICATION DIAGRAM 2: INTERNAL VIEW SIGNAL DETECT HOR SYNC PROCESSING H/W EQ VER VGA HD 15 PIN POWER RED PAIR1 BLUE PAIR3 GREEN PAIR2 OUTPUT CAT 5 PLUG AND PLAY AUDIO STEREO 3.5mm LEFT AUDIO MODULATION RIGHT CLOCK GENERATOR 9V, 1A 2.
SPECIAL APPLICATION INSTALLING YOUR TP115-110 6 OPERATION Step 1. Determine the best location for the TP115-110 and TP115-111. Where possible, locate the TP115-110 as close to the video source as possible and the TP115-111 as close to the receiving component as feasible. The TP115-110 requires only one adjustment to be made for optimal performance. The adjustment is video equalization for long cable lengths. 7.
SPECIAL APPLICATION Cause 4: Solution: Video equalization required. Adjust the VIDEO EQUALIZATION on the TP115-110. Long cable runs may require adjustment on both the TP115-110 and TP115-111. In general, cable runs less then 50 feet require little or no video equalization and should be set to minimum. Cable runs up to 400 feet will require near maximum equalization on both the transmitter and receiver. Cause 5: The display has a problem. Solution: Make sure the display has power and is turned ON.