SPECIAL APPLICATION MANUAL PART NUMBER: 400-0435-005 TP115-111 COMPUTER/COMPONENT VIDEO + AUDIO TWISTED PAIR RECEIVER USER’S GUIDE
SPECIAL APPLICATION TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS................ 2 GENERAL..........................................................2 INSTALLATION..................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR TP115-111 ....................................... 3 TECHNICAL SPECIFICATIONS ............................ 3 PRODUCT DESCRIPTION ..................
SPECIAL APPLICATION PRECAUTIONS / SAFETY WARNINGS • 1 Please read this manual carefully before using your TP115-111. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your TP115-111 and to prevent fire and shock hazards. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel or their authorized representatives must perform all service. 1.
SPECIAL APPLICATION ABOUT YOUR TP115-111 2 TECHNICAL SPECIFICATIONS Specifications are subject to change. See www.altinex.com for up-to-date information. TP115-111 COMPUTER/COMPONENT TWISTED PAIR (TP) TO VIDEO + AUDIO RECEIVER FEATURES/ DESCRIPTION GENERAL Inputs Video + Audio Output Video Audio Compatibility The TP115-111 receives computer video and audio signals over Twisted Pair-type (CAT-5) cable when used together with an ALTINEX Twisted Pair transmitter, such as the TP115-110.
SPECIAL APPLICATION PRODUCT DESCRIPTION 4 COMPUTER/ COMPONENT VIDEO OUTPUT 4 TP INPUT VIDEO EQUALIZATION POWER AUDIO OUTPUT 400-0435-005 4
SPECIAL APPLICATION APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP TP115-110 TP115-111 400-0435-005 5
SPECIAL APPLICATION DIAGRAM 2: INTERNAL VIEW TP115-111 POWER 2.
SPECIAL APPLICATION INSTALLING YOUR TP115-111 6 OPERATION Step 1. Determine the best location for the TP115-110 and TP115-111. Where possible, locate the TP115-110 as close to the video source as possible and the TP115-111 as close to the receiving component as feasible. The TP115-111 requires only one adjustment to be made for optimal performance. The adjustment is video equalization for long cable lengths. 7.
SPECIAL APPLICATION TROUBLESHOOTING GUIDE 8.2 NO SOUND 8 We have carefully tested and have found no problems in the supplied TP115-111. However, we would like to offer suggestions for the following: Cause 1: The source has a problem. Solution: Check the source and make sure that there is a signal present and all source connections are correct. If the source is working and there is still no sound, see Cause 2. 8.1 NO DISPLAY Cause 1: The source has a problem.
