User's Manual
Table Of Contents
- Preface
- Contents
- 1 Introduction
- 2 Safety requirements
- 3 Installation prerequisites
- 4 iRU4438 iRRH installation overview
- 5 Installing the iRU4438 iRRH
- 5.1 Assembling cables
- 5.2 Routing pre-assembled power/fronthaul Ethernet/grounding cables
- 5.3 Installing RF antennas on upper/lower omni-antenna brackets
- 5.4 Installing RF antenna cables
- 5.5 Installing the iRU4438 iRRH mounting bracket
- 5.6 Hoisting the iRU4438 iRRH on elevated structures
- 5.7 Installing the iRU4438 iRRH on the mounting bracket
- 5.8 Connecting the grounding cable
- 5.9 Connecting the fronthaul Ethernet cables
- 5.10 Connecting the 110/220 V ac power cable
- 5.11 Checking power
- 5.12 Installing the solar shield
- 6.13 Terms, Acronyms and Abbreviations
l
Preface
iRU4438 iRRH Product Description and Installation Guide iii
Preface
About this document
This document covers the basic installation of the Altiostar Networks, Inc. iRU4438 intelligent
Remote Radio Head (iRRH) on towers, walls, roof or other structures utilizing a universal
mounting assembly.
Connections to external interfaces, including signaling, grounding, and power are described.
Descriptions of the iRU4438 iRRH indicators are also provided.
Refer also to the Altiostar Networks iRB1200 intelligent Baseband Unit (iBBU) Product
Description and Installation Guide, document number 240-00-0007, for related information.
The iRB1200 iBBU is a companion product.
Intended users
The target audience for this document is installation and engineering personnel. It assumes
personnel have a basic understanding of wireless telecommunications terminology, and
experience in installing wireless telecommunications equipment.
Conventions used
Illustrations and photos in this document are intended to show a basic installation. They
show site and equipment configurations encountered during a typical installation. They do
not show all details and exceptions, but highlight the main points of the installation.
Altiostar Networks, Inc. will often be referred to as Altiostar Networks, or simply Altiostar.
The Altiostar Networks, Inc. iRU4438 intelligent Remote Radio Head will often be referred to
as the iRU4438 iRRH, or simply the iRRH. The iRB1200 Baseband Unit, a companion unit to
the iRU4438 iRRH in the Altiostar Networks LTE micro eNodeB solution, will often be referred
to as the iRB1200 iBBU, or simply the iBBU.
The Operator or Owner of the facility and equipment where the iRU4438 iRRH is to be
installed is referred to as the Operator in this document.
NOTE
This is an example of a note used in this document that denotes important
information about the text or procedure that follows it.