User's Manual

Caution
Protect your hearing!
Do not use your headset at loud volumes
or for long periods.
Charge your Headset
・Before you use your headset for the first time,
charge the battery for 2 hours for optimal battery
capacity and lifetime.
・Use only the original USB charging cable to avoid
any damage.
・Finish your call before charging, as the headset will
power off during charging.
Take control of your headset
WARNING
Hearing Safety
Danger: To avoid hearing damage, limit the time
you use headset at high volume
and set the volume at a safe level.
The Louder the volume, the shorter the
safe listening time is.
This package contains small parts that may be hazardous
to children and should be kept out of reach from children.
This product is not a toy - never allow children to play with
this product. Always store the product out of reach from
children. The bags themselves or the many small parts
they contain may cause choking if ingested.
Never try to dismantle the product yourself, or push objects
of any kind into the products, as this may cause short circuits
which could result in a fire or electric shock.
For your safety, avoid distractions from music or phone calls
while in traffic or other potentially dangerous environments.
Do not use in areas where there are explosive hazards.
Dispose of the product according to local standards and
regulations.
Speaker
Indicator Light
Micro USB Charger Jack
Volume key
Power / Mode
Function Operation
Power On Long press for 3 seconds
Power off Long press for 3 seconds
Answer call Short press one time
End call Short press one time
Redial last Outgoing number Double press
Pause, play Short press
Vol -, Vol + Short press vol- / vol+
Back / FWD Long press vol- / vol+
For optimal listening experince, keep your Bluetooth
headset around your phone. Bluetooth has a working
“range” of up to 10 meters between the phone and the
headset before audio degrades and the connection is lost.
Reduce the distance between your headset and Bluetooth
device, or remove obstacles between them.
Your headset will automatically try to reconnect after lost
Bluetooth connection. If they can’t, pair the headset
with the smartphone again as described in the user manual
(see Pair your headset on page “4”)
Charging Red LED on
Fully Charge Blue LED on
Low Battery  Red LED Flash with voice prompt
Pairing  Red & Blue LED Flash
Indicator Light
Pair your Headset
1. Turn device on. Press button for 3 seconds, the
indicator light flashes red and blue.
2. Activate Bluetooth on your smartphone, search and
select Cobra CA130.
3. If your smartphone asks for password, enter 0000.
4. If paired successfully, you will hear “Your
device
is connected”, indicator light will flash blue.
Power Save Mode
If you take your smartphone out of range of the
headset for more than 6 minutes, CA130 will power off
to save battery.
Pair Second Phones Simultaneously
1. After paired with the 1st phone. Turn off the Bluetooth
of first phone.
2. Power on CA130 headset again to enter paring mode.
3. Turn on the Bluetooth function of the 2nd phone,
search
Cobra CA130.
4. You will hear “Your device is connected” if it is connected.
The headset’s indicator light will flash Blue.
5. Turn on Bluetooth function of the 1st phone and find the
connected Bluetooth headset before. Click connection
to complete pairing phones simultaneously.
Restore the factory Settings
1. When charging, hold the button for about 5 seconds
till the red and blue indicator lights flashing three times
to restore factory Settings.
FCC Rules
WARNING: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) This device may not cause harmful interference,
and 2) this device must accept any interference received,including interference
that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The radiated output power of the device is far below the FCC radio frequency
exposure limits. Nevertheless, the device shall be used in such a manner that the
potential for human contact during normal operation is minimized
Welcome to Cobra CA130, the Bluetooth headset,
featuring intuitive audio enjoyment to accompany
you during exercise.
Designed for sound, style and comfort. Equipped
with integrate rapid charge technology to keep you
connected, and delivers high definition wideband
audio.
A-1
A-2
A-3
1
2
3
4
5
6
7