User's Manual

– Press and hold the Max Range Hi/Lo button or
change channels to return to Standby mode.
To turn maximum range extender on:
– Press the Max Range Hi/Lo button for less than
five seconds. Hi icon will be displayed. (High
power is not valid on channels 8~14)
To turn maximum range extender off:
– Press Max Range Hi/Lo button until Low icon
displayed.
Lock Function
•
The Lock function locks the Channel Up, Channel
Down, Volume Up, Volume Down and Mode/
Power buttons to prevent accidental operation.
To turn the lock on or off:
– Press and hold the Call/Lock button for
two seconds.
A beep sound is used to confirm your lock on or off
request. When in Lock mode,
the Lock icon will be displayed.
5
Lock Icon
Lock Button
Hi Power Icon
Low Power Icon
microTALK
®
Range
•
Your range will vary depending on terrain and conditions.
In flat, open country your radio will
operate at maximum range.
Buildings and foliage in the path of the
signal can reduce the range of the radio.
Dense foliage and hilly terrain will further
reduce the range of the radio.
On FRS Channels 8 through 14, your radio
automatically switches to low power, which
will limit the range the radio can communicate.
Remember, you can achieve maximum
range by using maximum range extender.
See page 4 for details.
Maximum Range
Reduced Range
Reduced Range